Material-dependent trueness of intraoral scanners: A comparative analysis of three scanning technologies for different crowns – An in vitro study
The Journal of Indian Prosthodontic Society · 2026-04 · 26 (2) · 184-193
DOI: 10.4103/jips.jips_190_25 ↗Kurz gefasst
Vergleichsstudie in der Zeitschrift The Journal of Indian Prosthodontic Society, online erschienen am 01.04.2026. Verfasst von Meghna Budati und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences, Saveetha University, Chenn…. Hauptthemen laut MEDLINE: Crowns. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).
Abstract (Originalsprache)
Aim
The aim of this was to assess and compare the accuracy of three intraoral scanners (IOS) under clinical conditions-active triangulation (Medit i700), parallel confocal (3Shape TRIOS), and optical triangulation (Primescan) by comparing their root mean square (RMS) deviation and maximum deviations to a high-accuracy reference scan using the 3Shape E4 extraoral scanner across six different crown material substrates. Settings and Design: The study was conducted in an in vitro setting, comparing different IOS technologies. Materials and Methods: An in vitro study was performed using a three-dimensional (3D)-printed maxillary model with crowns fabricated from lithium disilicate ceramic (Emax), layered zirconia, monolithic zirconia, cobalt–chromium alloy, Polyetheretherketone (Bio-HPP), and Polyetherketoneketone (Pekkton). Each IOS performed 24 scans of the crowns following device-specific protocols. Accuracy was assessed by superimposing scans with the reference using Geomagic Control X software (Version 2020.0.1, 3D Systems, Rock Hill, SC, USA) to determine RMS and maximum deviations. Statistical Analysis Used: Scanning accuracy among devices and materials was evaluated using one-way analysis of variance with Tukey post hoc tests. P < 0.05 was considered to be statistically significant.
Results
Optical triangulation demonstrated the highest trueness for most materials, with the lowest RMS deviations for Emax (0.031 ± 0.003 mm), Bio-HPP (0.034 ± 0.002 mm), and Pekkton (0.035 ± 0.002 mm). Active triangulation performed best for the reflective cobalt-chromium alloy (0.183 ± 0.256 mm). There were significant differences seen in the accuracy of scanners and materials ( P < 0.05).
Conclusion
IOS trueness is influenced by substrate material and scanner technology. Optical triangulation excelled with translucent and low-reflective materials, whereas active triangulation showed superior performance with the reflective substrates. Material-specific scanning protocols are critical for achieving optimal clinical outcomes.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Department of Prosthodontics, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences, Saveetha University, Chennai, Tamil Nadu, India.
- Department of Pedodontics, Saveetha Dental College and Hospitals, Saveetha Institute of Medical and Technical Sciences, Saveetha University, Chennai, Tamil Nadu, India.
Zitieren
APA
Budati, M., Maiti, S., & Paulraj, J. (2026). Material-dependent trueness of intraoral scanners: A comparative analysis of three scanning technologies for different crowns – An in vitro study. The Journal of Indian Prosthodontic Society, 26(2), 184-193. https://doi.org/10.4103/jips.jips_190_25
Vancouver
Budati M, Maiti S, Paulraj J. Material-dependent trueness of intraoral scanners: A comparative analysis of three scanning technologies for different crowns – An in vitro study. The Journal of Indian Prosthodontic Society. 2026;26(2):184-193. doi:10.4103/jips.jips_190_25
BibTeX
@article{Budati2026,
author = {Budati, Meghna and Maiti, Subhabrata and Paulraj, Jessy},
title = {Material-dependent trueness of intraoral scanners: A comparative analysis of three scanning technologies for different crowns – An in vitro study},
journal = {The Journal of Indian Prosthodontic Society},
year = {2026},
volume = {26},
number = {2},
pages = {184--193},
doi = {10.4103/jips.jips_190_25}
}
EUVIMED