EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Discrete element modeling of bivalve Mactra veneriformis: parameter calibration and mechanized harvesting validation

Hangqi Li, Bin Xu, Hao Wu, Xiaodong Lv, Yuzhong Lou, Xiuchen Li, Guochen Zhang, Gang Mu

Journal of Agricultural Engineering · 18.11.2026

DOI: 10.4081/jae.2026.2193 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Agricultural Engineering, online erschienen am 18.11.2026. Verfasst von Hangqi Li und 7 weiteren Autor:innen. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To reduce mudflat disturbance caused by hydraulic dredging and facilitate efficient, environmentally responsible mechanized harvesting of buried bivalves, this study aimed to develop an accurate discrete element method (DEM) model for analyzing Mactra veneriformis (M. veneriformis)–machine interactions and optimizing harvesting parameters. The geometry of M. veneriformis was reconstructed using three-dimensional scanning and represented in EDEM using a multi-sphere model. The Edinburgh elasto-plastic adhesion (EEPA) model was used to describe M. veneriformis–M. veneriformis interactions. Physical experiments were used to determine the static friction and restitution coefficients for M. veneriformis–stainless steel contacts and the restitution coefficient for M. veneriformis–M. veneriformis contacts, while DEM simulations were used to calibrate the remaining contact parameters. The angle of repose (AOR) was measured using the cylinder-lifting method and selected as the macroscopic response for DEM calibration. A Plackett–Burman design followed by a Box–Behnken design was used to screen and optimize the influential contact parameters. The rolling friction coefficient, static friction coefficient, and surface energy of M. veneriformis–M. veneriformis contacts were identified as the principal factors affecting the AOR. The optimized values were 0.05, 0.30, and 2 J m⁻², respectively. Using these parameters, the simulated AOR was 23.17°, with a relative error of 4.09% relative to the physical experiment. The calibrated model was subsequently applied to mechanized harvesting simulations and validated against field harvesting tests, reproducing the principal trends observed under field conditions. The validated DEM model provides a basis for analyzing M. veneriformis–machine interactions and optimizing mechanized harvesting systems, while the proposed modeling and calibration framework may also support DEM studies of other bivalves.

Zitieren

APA

Li, H., Xu, B., Wu, H., Lv, X., Lou, Y., Li, X., Zhang, G., & Mu, G. (2026). Discrete element modeling of bivalve Mactra veneriformis: parameter calibration and mechanized harvesting validation. Journal of Agricultural Engineering. https://doi.org/10.4081/jae.2026.2193

Vancouver

Li H, Xu B, Wu H, Lv X, Lou Y, Li X, et al. Discrete element modeling of bivalve Mactra veneriformis: parameter calibration and mechanized harvesting validation. Journal of Agricultural Engineering. 2026. doi:10.4081/jae.2026.2193

BibTeX
@article{Li2026,
  author = {Li, Hangqi and Xu, Bin and Wu, Hao and Lv, Xiaodong and Lou, Yuzhong and Li, Xiuchen and Zhang, Guochen and Mu, Gang},
  title = {Discrete element modeling of bivalve Mactra veneriformis: parameter calibration and mechanized harvesting validation},
  journal = {Journal of Agricultural Engineering},
  year = {2026},
  doi = {10.4081/jae.2026.2193}
}
Kostenlos starten →