EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Three-Dimensional Scanning-Based Discrete Element Modeling, Contact Parameter Calibration, and Validation of Sugar Beet Roots

Wang Qian, Xingbang Guo, Shenying Wang, Shengshi Xie, Yang Hao, Xin Guo

Applied Sciences · 18.06.2026 · 16 (12) · 6194

DOI: 10.3390/app16126194 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 18.06.2026. Verfasst von Wang Qian und 5 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Science and Technology of the Inner Mongolia Autonomous Region.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To enhance the fidelity of the DEM representation of sugar beet roots, the root geometry was reconstructed from three-dimensional scanning data and represented in EDEM2024 as a multi-sphere clump. The Hertz–Mindlin (no slip) model was used to describe particle contact behavior. The root–Q235 steel contact parameters were determined by drop-rebound, inclined-plane sliding, and inclined-plane rolling experiments. For root–root interactions, the parameters were further refined through cylinder-lifting repose-angle simulations combined with the steepest-ascent method and a three-factor quadratic orthogonal rotatable regression scheme. The optimized inter-root restitution coefficient, static friction coefficient, and rolling friction coefficient were 0.534, 0.728, and 0.080, respectively. With this parameter set, the deviation between the simulated and measured angles of repose was 0.86%, and the error obtained in the independent validation test was 1.5%. These results demonstrate that the proposed DEM model and calibrated parameter set can accurately represent the motion and contact behavior of sugar beet roots.

Förderung

  • Department of Science and Technology of the Inner Mongolia Autonomous Region

Zitieren

APA

Qian, W., Guo, X., Wang, S., Xie, S., Hao, Y., & Guo, X. (2026). Three-Dimensional Scanning-Based Discrete Element Modeling, Contact Parameter Calibration, and Validation of Sugar Beet Roots. Applied Sciences, 16(12), 6194. https://doi.org/10.3390/app16126194

Vancouver

Qian W, Guo X, Wang S, Xie S, Hao Y, Guo X. Three-Dimensional Scanning-Based Discrete Element Modeling, Contact Parameter Calibration, and Validation of Sugar Beet Roots. Applied Sciences. 2026;16(12):6194. doi:10.3390/app16126194

BibTeX
@article{Qian2026,
  author = {Qian, Wang and Guo, Xingbang and Wang, Shenying and Xie, Shengshi and Hao, Yang and Guo, Xin},
  title = {Three-Dimensional Scanning-Based Discrete Element Modeling, Contact Parameter Calibration, and Validation of Sugar Beet Roots},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {12},
  pages = {6194},
  doi = {10.3390/app16126194}
}
Kostenlos starten →