Low‑Shrinkage Photosensitive Polyimide for CMP-free Multilayer RDL Fabrication Process
IMAPSource Proceedings · 27.10.2026 · 2026 (Symposium)
DOI: 10.4071/001c.173326 ↗Kurz gefasst
Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 27.10.2026. Verfasst von T. Kambara und 6 weiteren Autor:innen.
Abstract (Originalsprache)
As semiconductor systems advance toward heterogeneous integration, fan-out wafer-level packaging (FOWLP), and three-dimensional stacking, undulation in multilayer redistribution layer (RDL) structures has become a critical process challenge. In this study, the effects of dielectric cure shrinkage and dielectric layer thickness on conductor undulation were investigated using a four-polymer/three-metal (4P3M) multilayer RDL test vehicle. Four photosensitive dielectric formulations with cure shrinkage values ranging from 8% to 30% were evaluated, and the undulation of each dielectric layer (Ud) was quantified from cross-sectional images. In a configuration where the wiring layers were stacked directly above one another, Ud increased with the number of stacked layers, and this layer-by-layer accumulation was governed by the cure shrinkage: the higher-shrinkage formulations exhibited progressive accumulation, whereas formulations with a cure shrinkage of approximately 15% or below largely suppressed it. In a configuration where the upper wiring layers were laterally offset, higher cure shrinkage instead produced larger vertical displacement and deformation of the wiring. The dielectric thickness was found to be an additional factor governing undulation, with thinner layers exhibiting relatively larger undulation. These results indicate that to maintain planarity through multilayer stacking, both a sufficiently low cure shrinkage and an adequate dielectric thickness must be selected.
Zitieren
APA
Kambara, T., Matsukawa, D., Okuda, T., Fukuzumi, S., Kawashita, S., Imazu, Y., & Minegishi, T. (2026). Low‑Shrinkage Photosensitive Polyimide for CMP-free Multilayer RDL Fabrication Process. IMAPSource Proceedings, 2026(Symposium). https://doi.org/10.4071/001c.173326
Vancouver
Kambara T, Matsukawa D, Okuda T, Fukuzumi S, Kawashita S, Imazu Y, et al. Low‑Shrinkage Photosensitive Polyimide for CMP-free Multilayer RDL Fabrication Process. IMAPSource Proceedings. 2026;2026(Symposium). doi:10.4071/001c.173326
BibTeX
@article{Kambara2026,
author = {Kambara, T. and Matsukawa, D. and Okuda, T. and Fukuzumi, S. and Kawashita, S. and Imazu, Y. and Minegishi, T.},
title = {Low‑Shrinkage Photosensitive Polyimide for CMP-free Multilayer RDL Fabrication Process},
journal = {IMAPSource Proceedings},
year = {2026},
volume = {2026},
number = {Symposium},
doi = {10.4071/001c.173326}
}
EUVIMED