Enhanced Adhesion of Electroplated Ti/Cu Films on Glass by CF₄ Plasma Treatment and Annealing in Glass Core PCB Technology
IMAPSource Proceedings · 27.10.2026 · 2026 (Symposium)
DOI: 10.4071/001c.173306 ↗Kurz gefasst
Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 27.10.2026. Verfasst von Mei-Yun Yeh und 6 weiteren Autor:innen.
Abstract (Originalsprache)
Metallization is a critical process in glass core printed circuit board (PCB) technology, where strong adhesion between metal layers and glass substrates is required. This study investigates the effects of CF₄ plasma treatment and post-annealing on the adhesion strength of electroplated Ti/Cu layers on glass substrates. CF₄ plasma modifies the glass surface by disrupting the network structure, reducing bridging oxygen (BO), and removing boron and silicon through chemical etching. These reactions increase surface roughness but also generate non-bridging oxygen (NBO) and fluorine-containing residues that may weaken chemical bonding at the interface. Surface analyses using X-ray Photoelectron Spectroscopy (XPS) and Energy Dispersive X-ray Spectroscopy (EDX) were conducted to examine fluorine residues on plasma-treated glass surfaces and their correlation with pull strength. The results show that samples without CF₄ plasma treatment exhibit very low adhesion. Increasing the surface roughness to an appropriate level significantly enhances adhesion strength through roughness-induced mechanical interlocking. Post-annealing further improves the adhesion by stabilizing the metal–glass interface and relieving interfacial stress. However, when the surface roughness exceeds an optimum level, the adhesion no longer improves and eventually decreases because excessive fluorination offsets the beneficial effect of mechanical interlocking. Further increases in plasma intensity lead to adhesion degradation because excessive NBO formation and non-volatile fluorides counteract the beneficial roughening effect. These results reveal the balance between plasma-induced surface roughening, chemical modification, and annealing effects, and provide guidance for optimizing metallization processes in glass core PCB technology.
Zitieren
APA
Yeh, M., Chan, C., Chan, H., Chang, C., Cheng, S., Hsu, H., & Lan, C. W. (2026). Enhanced Adhesion of Electroplated Ti/Cu Films on Glass by CF₄ Plasma Treatment and Annealing in Glass Core PCB Technology. IMAPSource Proceedings, 2026(Symposium). https://doi.org/10.4071/001c.173306
Vancouver
Yeh M, Chan C, Chan H, Chang C, Cheng S, Hsu H, et al. Enhanced Adhesion of Electroplated Ti/Cu Films on Glass by CF₄ Plasma Treatment and Annealing in Glass Core PCB Technology. IMAPSource Proceedings. 2026;2026(Symposium). doi:10.4071/001c.173306
BibTeX
@article{Yeh2026,
author = {Yeh, Mei-Yun and Chan, Chih-Kai and Chan, Hsuan-Chung and Chang, Chia-Hao and Cheng, Shih-Lian and Hsu, Hsiao-Ping and Lan, C. W.},
title = {Enhanced Adhesion of Electroplated Ti/Cu Films on Glass by CF₄ Plasma Treatment and Annealing in Glass Core PCB Technology},
journal = {IMAPSource Proceedings},
year = {2026},
volume = {2026},
number = {Symposium},
doi = {10.4071/001c.173306}
}
EUVIMED