EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhanced Adhesion of Copper Films on Fused Silica Glass Substrate by Plasma Pre-Treatment

Liqing Yang, Xianli Yang, Fei Gao, Yongmao Guan, Rui Wan, Pengfei Wang

Materials · 21.07.2023 · 16 (14) · 5152

DOI: 10.3390/ma16145152 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 21.07.2023. Verfasst von Liqing Yang und 5 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Transient Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences (CAS), Xi'an 7…. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the Qinchuangyuan "Scientist + Engineer" Team Development Program of the Shaanxi Provincial Department of Science and Technology, Shaanxi Provincial Key Research and Development Program, Shaanxi Provincial Department of Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A non-thermal atmospheric jet plasma pre-treatment technique was introduced to help the growth of extremely sticky copper films on fused silica glass substrates. A tape test was utilized to assess the bonding quality between copper films and fused silica glass substrates. AFM was used to characterize the sample surface roughness and XPS for chemical bonding characterization. The Owens–Wendt method and a Theta Lite Optical Tensiometer were used to analyze the contact angle and surface energy. The results showed that the surface energy greatly increased from 34.6 ± 0.3 mJ·m−2 to 55.9 ± 0.4 mJ·m−2 after 25 s plasma pre-treatment due to the increasing Si-O and Si-N concentrations, which brought about the electrostatic force increasing at the copper/glass interface. After 25 s plasma pre-treatment, the average surface roughness (Sa) grew from 0.8 ± 0.1 nm to 2.4 ± 0.3 nm. With higher surface roughness, there were more spaces and vacancies for the copper atoms to make contact on the bonded surfaces and increase the mechanical bite force. The electrostatic force and the mechanical bite force on the interface helped to form an atomic diffusion connection layer and improved the interactions between the copper film and the glass substrate. The findings in the SEM supported the conclusions stated above. Therefore, the adhesion between copper films and fused silica glass substrates increased by about 20% by 25 s plasma pre-treatment compared with the untreated glass substrate.

Schlagwörter

Stichwörter der Autor:innen

adhesioncopper filmsdiffusion junction layerplasma pre-treatment

Autor:innen und Institutionen

  • State Key Laboratory of Transient Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences (CAS), Xi'an 710119, China.
  • Institute for Agro-Food Standards and Testing Technology, Shanghai Academy of Agricultural Sciences, Shanghai 200062, China.

Förderung

  • the Qinchuangyuan "Scientist + Engineer" Team Development Program of the Shaanxi Provincial Department of Science and Technology
  • Shaanxi Provincial Key Research and Development Program
  • Shaanxi Provincial Department of Science and Technology

Zitieren

APA

Yang, L., Yang, X., Gao, F., Guan, Y., Wan, R., & Wang, P. (2023). Enhanced Adhesion of Copper Films on Fused Silica Glass Substrate by Plasma Pre-Treatment. Materials, 16(14), 5152. https://doi.org/10.3390/ma16145152

Vancouver

Yang L, Yang X, Gao F, Guan Y, Wan R, Wang P. Enhanced Adhesion of Copper Films on Fused Silica Glass Substrate by Plasma Pre-Treatment. Materials. 2023;16(14):5152. doi:10.3390/ma16145152

BibTeX
@article{Yang2023,
  author = {Yang, Liqing and Yang, Xianli and Gao, Fei and Guan, Yongmao and Wan, Rui and Wang, Pengfei},
  title = {Enhanced Adhesion of Copper Films on Fused Silica Glass Substrate by Plasma Pre-Treatment},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {14},
  pages = {5152},
  doi = {10.3390/ma16145152}
}
Kostenlos starten →