EUVIMEDEUVIMED entdecken
Crossref

Characterizing the Impact of In-Plane Deformation in Die-to-Wafer Hybrid Bonding from Die Warpage and Bonder Shape Effects

Chongyang Cai, Liu Jiang, El Mehdi Bazizi

IMAPSource Proceedings · 26.10.2026 · 2026 (Symposium)

DOI: 10.4071/001c.173035 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 26.10.2026. Verfasst von Chongyang Cai und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The increasing demand for high-performance computing and artificial intelligence is accelerating the adoption of advanced packaging technologies capable of supporting a higher number of interconnects with reduced pitch. Die-to-wafer (D2W) hybrid bonding has emerged as an important enabler for next-generation heterogeneous integration because it provides high-density interconnects with superior electrical performance. However, the process also introduces critical overlay challenges caused by mechanical deformation of the die during die chucking and bonding. In this work, a physics-based model is used to characterize in-plane deformation (IPD) in D2W hybrid bonding and to decouple the respective contributions from die chucking and bonding-induced deformation. The model captures the full bonding workflow, including incoming die warpage, vacuum chucking, bond-wave propagation, and final die-substrate gap closure. The results show that the final post-bonding IPD originates from two coupled sources: deformation introduced when the die is attached to the bonding head and additional deformation generated as the bonding wave propagates during hybrid bonding. Both contributions depend strongly on the incoming die warpage and on the bonder pedestal shape. For dies bonded with a symmetric round pedestal, the in-plane deformation remains nearly symmetric in the x and y directions. In contrast, strip-shaped pedestals introduce anisotropic deformation, and for a horizontal strip pedestal the in-plane deformation along the strip direction is shown to be largely dominated by post-chucking deformation, whereas the perpendicular direction contains a more significant bonding-induced contribution. The model results are consistent with measured die-stretching trends and provide a useful framework for optimizing incoming die warpage and bonder geometry to reduce overlay error in D2W hybrid bonding.

Zitieren

APA

Cai, C., Jiang, L., & Bazizi, E. M. (2026). Characterizing the Impact of In-Plane Deformation in Die-to-Wafer Hybrid Bonding from Die Warpage and Bonder Shape Effects. IMAPSource Proceedings, 2026(Symposium). https://doi.org/10.4071/001c.173035

Vancouver

Cai C, Jiang L, Bazizi EM. Characterizing the Impact of In-Plane Deformation in Die-to-Wafer Hybrid Bonding from Die Warpage and Bonder Shape Effects. IMAPSource Proceedings. 2026;2026(Symposium). doi:10.4071/001c.173035

BibTeX
@article{Cai2026,
  author = {Cai, Chongyang and Jiang, Liu and Bazizi, El Mehdi},
  title = {Characterizing the Impact of In-Plane Deformation in Die-to-Wafer Hybrid Bonding from Die Warpage and Bonder Shape Effects},
  journal = {IMAPSource Proceedings},
  year = {2026},
  volume = {2026},
  number = {Symposium},
  doi = {10.4071/001c.173035}
}
Kostenlos starten →