EUVIMEDEUVIMED entdecken
Crossref

Revealing the effects of particle shape and distribution on the direct wafer-to-wafer bonding dynamics

Tao He, Wenkai Lu, Zhoulong Xu, Zhouping Yin, Bin Xie, Hao Wu

Journal of Applied Physics · 07.08.2026 · 140 (5)

DOI: 10.1063/5.0341214 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Applied Physics, online erschienen am 05.08.2026. Verfasst von Tao He und 5 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Gefördert von: Hubei Provincial Natural Science Foundation of China, National Science Foundation of Wuhan, STAR Project by the School of Mechanical Science and Engineering of Huazhong University of Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Particle contamination control is one of the most critical challenges in wafer-to-wafer (W2W) hybrid bonding technology. Particles induce voids at the bonding interface, thereby compromising the bonding quality and reliability. However, the effects of particle shape and distribution on the W2W pre-bonding process have not yet been investigated. In this work, three-dimensional (3D) W2W hybrid bonding analysis involving particles was conducted. The influence of particle on bonding front propagation was analyzed. Besides, the effects of particle shape and position on bonding time, interfacial void size, and upper wafer von Mises stress were quantitatively evaluated. The results show that the presence of particle leads to the split of the bonding front and a pronounced delay in bonding time. Compared with the cylindrical particle, the square particle results in a longer bonding delay (4.4 s vs 3.1 s) and produces a larger void height (17.1 μm vs 11.1 μm). Moreover, it is found that particle contamination significantly amplifies the void defects. Particle position is found to have a non-monotonic influence on bonding dynamics. As the particle location gradually moves away from the wafer center, the area and height of void, as well as the total bonding time exhibit a trend of first increasing and then decreasing. Specifically, a cylindrical particle located at 70–80 mm from wafer center generates the largest void area (up to 2350 mm2), the highest void height (14.8 μm), and the longest bonding time (3.6 s). This study offers a quantitative guidance for contamination control in 3D heterogeneous integration technology.

Förderung

  • Hubei Provincial Natural Science Foundation of China
  • National Science Foundation of Wuhan
  • STAR Project by the School of Mechanical Science and Engineering of Huazhong University of Science and Technology

Zitieren

APA

He, T., Lu, W., Xu, Z., Yin, Z., Xie, B., & Wu, H. (2026). Revealing the effects of particle shape and distribution on the direct wafer-to-wafer bonding dynamics. Journal of Applied Physics, 140(5). https://doi.org/10.1063/5.0341214

Vancouver

He T, Lu W, Xu Z, Yin Z, Xie B, Wu H. Revealing the effects of particle shape and distribution on the direct wafer-to-wafer bonding dynamics. Journal of Applied Physics. 2026;140(5). doi:10.1063/5.0341214

BibTeX
@article{He2026,
  author = {He, Tao and Lu, Wenkai and Xu, Zhoulong and Yin, Zhouping and Xie, Bin and Wu, Hao},
  title = {Revealing the effects of particle shape and distribution on the direct wafer-to-wafer bonding dynamics},
  journal = {Journal of Applied Physics},
  year = {2026},
  volume = {140},
  number = {5},
  doi = {10.1063/5.0341214}
}
Kostenlos starten →