EUVIMEDEUVIMED entdecken
Crossref

Improvement of High-Power LED Performance with Sintered Chip Attachment

T. Wang, G. Lei, G-Q. Lu, X. Chen, L. Guido

IMAPSource Proceedings · 14.07.2026 · 2008 (Symposium)

DOI: 10.4071/001c.165060 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 14.07.2026. Verfasst von T. Wang und 4 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-power (HP), high-brightness (HB) light-emitting diodes are progressively making their way into the general illumination applications. Now, interconnection and packaging of the LED chips are being recognized as potential barriers for the advancement of LED lamps. Chip attachment is usually the first and important step in packaging LED lamps. The attachment material provides mechanical support, heat dissipation, and current flow for vertically conducting diodes. Since LED light output decreases rapidly with increasing chip temperature and the lamp degrades faster at high temperature, thermal performance of the chip attachment is critically important to performance and reliability of the lamps. In this study, we tested three different die-attach materials with their corresponding processes: silver epoxy processed by curing; lead-free solder by solder-reflow; and nanosilver paste by low-temperature sintering. The attached chips were tested at varying current density up to 3A/mm2. We found that the chips attached using the nanoscale silver paste had a significantly higher light output than the lead-free soldered chips, which in turn had higher light output than the epoxied chips. This is explained by the higher thermal conductivity of the sintered silver than those of the solder and epoxy. Higher thermal conductivity of the sintered silver attachment resulted in a lower junction temperature at a given level of current density, thus higher light output.

Zitieren

APA

Wang, T., Lei, G., Lu, G., Chen, X., & Guido, L. (2026). Improvement of High-Power LED Performance with Sintered Chip Attachment. IMAPSource Proceedings, 2008(Symposium). https://doi.org/10.4071/001c.165060

Vancouver

Wang T, Lei G, Lu G, Chen X, Guido L. Improvement of High-Power LED Performance with Sintered Chip Attachment. IMAPSource Proceedings. 2026;2008(Symposium). doi:10.4071/001c.165060

BibTeX
@article{Wang2026,
  author = {Wang, T. and Lei, G. and Lu, G-Q. and Chen, X. and Guido, L.},
  title = {Improvement of High-Power LED Performance with Sintered Chip Attachment},
  journal = {IMAPSource Proceedings},
  year = {2026},
  volume = {2008},
  number = {Symposium},
  doi = {10.4071/001c.165060}
}
Kostenlos starten →