EUVIMEDEUVIMED entdecken
Crossref

Microtransfer Printing-Based High-Efficiency Fabrication of High-Voltage Mini-LED Chip

Min Wu, Guoxu Fang, Boyan Zhao, Li Liu, Haojie Zhou, Zhu Yang, Xiaoxiao Ji, Luqiao Yin, Jianhua Zhang

IEEE Transactions on Electron Devices · 2026-06 · 73 (6) · 3713-3719

DOI: 10.1109/ted.2026.3688224 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Electron Devices, 2026-06. Verfasst von Min Wu und 8 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Gefördert von: Special Funds for Promoting High-Quality Industrial Development in Shanghai, National Key Research and Development Program of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Mini-LEDs, with micrometer-scale chip sizes, enhance display brightness, contrast, and color performance, and are widely used in high-end TVs and monitors. Conventional transfer techniques rely on multiple chip-by-chip transfers to form high-voltage structures, with metal series and interconnections typically completed during packaging. In this article, a novel fabrication method for high-voltage mini-LED chips based on microtransfer printing is proposed, enabling batch chip transfer. Multiple mini-LED chips are simultaneously transferred from the source substrate to a glass substrate, with the chip layout on the source wafer designed as an integer multiple of the stamp array and the target substrate, allowing repeated transfers from a single source wafer. After transfer, each group of $2\times 2$ mini-LED chips is interconnected in series, and the glass substrate is diced into multiple $2\times 2$ chip arrays, with each array forming a single high-voltage mini-LED chip. Consequently, series connection and interconnection are completed during the chip fabrication process. The fabricated high-voltage mini-LED device consists of a series-connected $2\times 2$ array with a pixel size of $85\times 85~\mu $ m and a pitch of $300~\mu $ m, yielding an overall chip dimension of $600\times 600~\mu $ m. Approximately 4000 high-voltage mini-LEDs can be obtained from a 2-in glass wafer. The optical and electrical properties of the fabricated devices were systematically characterized. The turn-on voltage was 7.6 V. At 1 mA, the luminance values of the mini-LED chip before transfer and the packaged high-voltage mini-LED chip are $1.97\times 10^{{6}}$ and $1.57\times 10^{{6}}$ cd/m 2 , respectively, with the packaged device retaining 80.03% of the pretransfer luminance. As the injection current increased from 0.05 to 1 mA, a slight blue shift in the emission spectrum was observed, while the CIE coordinates remained near the edge of the color space.

Förderung

  • Special Funds for Promoting High-Quality Industrial Development in Shanghai
  • National Key Research and Development Program of China

Zitieren

APA

Wu, M., Fang, G., Zhao, B., Liu, L., Zhou, H., Yang, Z., Ji, X., Yin, L., & Zhang, J. (2026). Microtransfer Printing-Based High-Efficiency Fabrication of High-Voltage Mini-LED Chip. IEEE Transactions on Electron Devices, 73(6), 3713-3719. https://doi.org/10.1109/ted.2026.3688224

Vancouver

Wu M, Fang G, Zhao B, Liu L, Zhou H, Yang Z, et al. Microtransfer Printing-Based High-Efficiency Fabrication of High-Voltage Mini-LED Chip. IEEE Transactions on Electron Devices. 2026;73(6):3713-3719. doi:10.1109/ted.2026.3688224

BibTeX
@article{Wu2026,
  author = {Wu, Min and Fang, Guoxu and Zhao, Boyan and Liu, Li and Zhou, Haojie and Yang, Zhu and Ji, Xiaoxiao and Yin, Luqiao and Zhang, Jianhua},
  title = {Microtransfer Printing-Based High-Efficiency Fabrication of High-Voltage Mini-LED Chip},
  journal = {IEEE Transactions on Electron Devices},
  year = {2026},
  volume = {73},
  number = {6},
  pages = {3713--3719},
  doi = {10.1109/ted.2026.3688224}
}
Kostenlos starten →