EUVIMEDEUVIMED entdecken
Crossref

Low-k Interconnect Oriented Lead Free Sn-Cu Bump Process Integration with Sn/Cu Stack Plating

Tadashi Iijima, Tatsuo Migita, Takashi Togasaki, Masayuki Miura, Toshistune Iijima, Kyoko Kato, Kazuhiro Murakami, Masahide Goto, Hiroyuki Oohashi, Hiroki Sakurai, Koro Nagamine, Hirokazu Ezawa

IMAPSource Proceedings · 10.07.2026 · 2008 (Symposium)

DOI: 10.4071/001c.164928 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 10.07.2026. Verfasst von Tadashi Iijima und 11 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

We have developed Low-k oriented lead free Sn-Cu bump process integration with Sn/Cu stack plating. The key features are lower cost process than alloy plating, by sequential plating pure Cu and pure Sn, and suitable for low-k interconnects, with Sn-Cu bump material has high potential of stress alleviation effect. Sn-Cu bump employed sequential Cu and Sn electroplating followed flux reflows. We have found wide process latitude depended on stacked thickness ratio of Cu/Sn. Single metal plating process combination with Cu and Sn has a cost advantage. Thin Ni barrier layer thickness has achieved only 350nm with sputtering. The reliability test shows superior results of TCT B (Thermal cycle test), PCT, and HTS reliability test with low-k material interconnection, which use k=2.7 material. Sn-Cu bump has a high creep rate, therefore Su-Cu deformed itself and alleviated the stress of thermal cycle for low-k interconnects. EM test also shows sufficient for application. Thus, the lead free SnCu bump has a potential of most suitable candidate of low-k BEOL 65 nm and more shrinkage generation which has weaker mechanical property and greater die size.

Zitieren

APA

Iijima, T., Migita, T., Togasaki, T., Miura, M., Iijima, T., Kato, K., Murakami, K., Goto, M., Oohashi, H., Sakurai, H., Nagamine, K., & Ezawa, H. (2026). Low-k Interconnect Oriented Lead Free Sn-Cu Bump Process Integration with Sn/Cu Stack Plating. IMAPSource Proceedings, 2008(Symposium). https://doi.org/10.4071/001c.164928

Vancouver

Iijima T, Migita T, Togasaki T, Miura M, Iijima T, Kato K, et al. Low-k Interconnect Oriented Lead Free Sn-Cu Bump Process Integration with Sn/Cu Stack Plating. IMAPSource Proceedings. 2026;2008(Symposium). doi:10.4071/001c.164928

BibTeX
@article{Iijima2026,
  author = {Iijima, Tadashi and Migita, Tatsuo and Togasaki, Takashi and Miura, Masayuki and Iijima, Toshistune and Kato, Kyoko and Murakami, Kazuhiro and Goto, Masahide and Oohashi, Hiroyuki and Sakurai, Hiroki and Nagamine, Koro and Ezawa, Hirokazu},
  title = {Low-k Interconnect Oriented Lead Free Sn-Cu Bump Process Integration with Sn/Cu Stack Plating},
  journal = {IMAPSource Proceedings},
  year = {2026},
  volume = {2008},
  number = {Symposium},
  doi = {10.4071/001c.164928}
}
Kostenlos starten →