EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Compositional Design and Thermal Processing of a Novel Lead-Free Cu–Zn–Al–Sn Medium Entropy Brass Alloy

Spyridon Chaskis, Stavroula Maritsa, Paul Stavroulakis, Sofia Papadopoulou, Russell Goodall, Spyros Papaefthymiou

Metals · 24.05.2024 · 14 (6) · 620

DOI: 10.3390/met14060620 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 24.05.2024. Verfasst von Spyridon Chaskis und 5 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: EPSRC, Centre for Doctoral Training in Advanced Metallic Systems.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the current work, a novel medium entropy copper alloy was designed with the aim of avoiding the use of expensive, hazardous or scarce alloying elements and instead employing widely available and cost-effective alternatives. In order to investigate this unknown region of multicomponent alloy compositions, the thermo-physical parameters were calculated and the CALPHAD method was utilized. This led to the design of the Cu50Zn25Al20Sn5 at. % (Cu53.45Zn27.49Al9.08Sn9.98 wt. %) alloy with a relatively low density of 6.86 g/cm3 compared with conventional brasses. The designed alloy was manufactured through vacuum induction melting, producing two ingots weighing 1.2 kg each, which were subjected to a series of heat treatments. The microstructural evolution of the alloy in the as-cast and heat-treated conditions was assessed through optical and scanning electron microscopy. The hardness of the as-cast and heat-treated alloy at room temperature was also studied. The alloy was characterized by a multiphase microstructure containing a major Cu-rich (Cu–Zn–Al) matrix reinforced with a secondary Zn-rich (Zn–Cu) phase and pure Sn. In terms of mechanical properties, the developed alloy exhibited high hardness values of roughly 378 HV0.2 and 499 HV0.2 in the as-cast and heat-treated conditions, respectively.

Förderung

  • EPSRC
  • Centre for Doctoral Training in Advanced Metallic Systems

Zitieren

APA

Chaskis, S., Maritsa, S., Stavroulakis, P., Papadopoulou, S., Goodall, R., & Papaefthymiou, S. (2024). Compositional Design and Thermal Processing of a Novel Lead-Free Cu–Zn–Al–Sn Medium Entropy Brass Alloy. Metals, 14(6), 620. https://doi.org/10.3390/met14060620

Vancouver

Chaskis S, Maritsa S, Stavroulakis P, Papadopoulou S, Goodall R, Papaefthymiou S. Compositional Design and Thermal Processing of a Novel Lead-Free Cu–Zn–Al–Sn Medium Entropy Brass Alloy. Metals. 2024;14(6):620. doi:10.3390/met14060620

BibTeX
@article{Chaskis2024,
  author = {Chaskis, Spyridon and Maritsa, Stavroula and Stavroulakis, Paul and Papadopoulou, Sofia and Goodall, Russell and Papaefthymiou, Spyros},
  title = {Compositional Design and Thermal Processing of a Novel Lead-Free Cu–Zn–Al–Sn Medium Entropy Brass Alloy},
  journal = {Metals},
  year = {2024},
  volume = {14},
  number = {6},
  pages = {620},
  doi = {10.3390/met14060620}
}
Kostenlos starten →