Development of Epoxy Molding Compound for QFN Package
IMAPSource Proceedings · 26.06.2026 · 2008 (Symposium)
DOI: 10.4071/001c.164100 ↗Kurz gefasst
Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 26.06.2026. Verfasst von Xinyu Du und 4 weiteren Autor:innen.
Abstract (Originalsprache)
The market for QFN package is expending all over the world in recently years. However, compare to normal QFP package, QFN need pay more attention to package warpage due to its asymmetric design. It becomes a challenge for epoxy molding compound supplier to design suitable material to satisfy both warpage and reliability. In this study, finite element simulation analysis of package warpage was conducted to calculate the warpage based on EMC properties and package parameters. Influence of EMC properties on panel warpage was discussed. The effect of epoxy resin and catalyst was evaluated. Effect of stress modifier was also tested in this study. The adhesion to lead frame finishing was measured to understand the effect on epoxy resin, catalyst and stress modifier on interfacial adhesion strength. Materials were molded on internal QFN test vehicle and subject to Standard Jedec Level testing. It was found with certain raw material configuration, Jedec MSL 1 with lead free soldering condition can be achieved together with flat warpage.
Zitieren
APA
Du, X., Xie, G., Han, J., Zhang, J., & Liang, S. (2026). Development of Epoxy Molding Compound for QFN Package. IMAPSource Proceedings, 2008(Symposium). https://doi.org/10.4071/001c.164100
Vancouver
Du X, Xie G, Han J, Zhang J, Liang S. Development of Epoxy Molding Compound for QFN Package. IMAPSource Proceedings. 2026;2008(Symposium). doi:10.4071/001c.164100
BibTeX
@article{Du2026,
author = {Du, Xinyu and Xie, Guangchao and Han, Jianglong and Zhang, Jack and Liang, Shawn},
title = {Development of Epoxy Molding Compound for QFN Package},
journal = {IMAPSource Proceedings},
year = {2026},
volume = {2008},
number = {Symposium},
doi = {10.4071/001c.164100}
}
EUVIMED