EUVIMEDEUVIMED entdecken
Crossref

Break Down Failure Process of the Flip Chip Bumps Caused by Current Stressing

Shigeaki Suganuma, Toshio Gomyo, Yuya Yamagishi, Kei Imafuji, Masaki Sanada, Yuko Karasawa, Kei Murayama, Takashi Kurihara, Yukiharu Takeuchi

IMAPSource Proceedings · 07.05.2026 · 2009 (Symposium)

DOI: 10.4071/001c.161905 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 07.05.2026. Verfasst von Shigeaki Suganuma und 8 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Break down failure process by electromigration in flip chip bump connections under current stressing at certain temperatures was studied. The flip chip bumps used for these experiments consisted of Cu post formed with electroplating and SnAg3.0Cu0.5 solder. Under bump metallurgy was electroless plated Ni(6um)/Au(0.5 um) on Cu pad. Electron flow to induce the electromigration was from organic substrate side (Cu pad) to chip side (Cu post) with current density of 4.0×104A/cm2 at 165 ℃. As a result of that, the failure process of the bumps under current stressing was found to be progressed in several stages. As the first stage, diffusion of Au was significantly occurred within a few hours. In the second stage, Cu6Sn5 intermetallic compound (IMC) formation was enhanced on the surface of the Cu post and the IMC was reached to the surface of the under bump metallurgy. In the third stage, this stage was frequently occurred at the same time of the second stage, Ni diffusion into Cu6Sn5 IMC and the formation of (Cu,Ni)6Sn5 IMC were simultaneously occurred. In the last stage, narrow gaps and voids were generated at the intra- and interfaces of (Cu,Ni)6Sn5 IMC.

Zitieren

APA

Suganuma, S., Gomyo, T., Yamagishi, Y., Imafuji, K., Sanada, M., Karasawa, Y., Murayama, K., Kurihara, T., & Takeuchi, Y. (2026). Break Down Failure Process of the Flip Chip Bumps Caused by Current Stressing. IMAPSource Proceedings, 2009(Symposium). https://doi.org/10.4071/001c.161905

Vancouver

Suganuma S, Gomyo T, Yamagishi Y, Imafuji K, Sanada M, Karasawa Y, et al. Break Down Failure Process of the Flip Chip Bumps Caused by Current Stressing. IMAPSource Proceedings. 2026;2009(Symposium). doi:10.4071/001c.161905

BibTeX
@article{Suganuma2026,
  author = {Suganuma, Shigeaki and Gomyo, Toshio and Yamagishi, Yuya and Imafuji, Kei and Sanada, Masaki and Karasawa, Yuko and Murayama, Kei and Kurihara, Takashi and Takeuchi, Yukiharu},
  title = {Break Down Failure Process of the Flip Chip Bumps Caused by Current Stressing},
  journal = {IMAPSource Proceedings},
  year = {2026},
  volume = {2009},
  number = {Symposium},
  doi = {10.4071/001c.161905}
}
Kostenlos starten →