Materials and Process Selection for High Frequency Flip Chip
IMAPSource Proceedings · 20.07.2026 · 2008 (Symposium)
DOI: 10.4071/001c.165139 ↗Kurz gefasst
Fachartikel in der Zeitschrift IMAPSource Proceedings, online erschienen am 20.07.2026. Verfasst von Katarina Boustedt.
Abstract (Originalsprache)
Flip chip has since decades been the primary choice for chip interconnect for high performance circuits. Over the last few years, interest from the microwave arena has increased, and at this point in time microwave flip chip is a possible option for volume production. Three groups of experiments are reported. The first experiments are on stud bumping thin film substrates for subsequent flip chip bonding. The wire was 17-μm diameter Au1Pd and bumping was uniform and successful, after some initial equipment problems. The second is a set of tests on flip chip bonding using gold stud bumps, gold tin solder-on-substrate, and plated gold pillars on alumina carriers. To evaluate the joining process using these different bumps, chips made of alumina with coplanar waveguide transmission lines were thermocompression bonded to the bumped carriers. Bonder parameters were assessed related to the different bump types and materials. The bonding results were analyzed using shear tests, transmissive x-ray and scanning electron microscopy on cross-sections. The third experiment lot contains early results on reliability of stud bump flip chip of gallium arsenide microstrip chips. Since the sample availability was very low and the joining process still under development, the results are indeterminate, although it was fruitful to establish adequate methods of analysis and test.
Zitieren
APA
Boustedt, K. (2026). Materials and Process Selection for High Frequency Flip Chip. IMAPSource Proceedings, 2008(Symposium). https://doi.org/10.4071/001c.165139
Vancouver
Boustedt K. Materials and Process Selection for High Frequency Flip Chip. IMAPSource Proceedings. 2026;2008(Symposium). doi:10.4071/001c.165139
BibTeX
@article{Boustedt2026,
author = {Boustedt, Katarina},
title = {Materials and Process Selection for High Frequency Flip Chip},
journal = {IMAPSource Proceedings},
year = {2026},
volume = {2008},
number = {Symposium},
doi = {10.4071/001c.165139}
}
EUVIMED