EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

In vitro color prediction of the shade-gradient 5 mol% yttria-partially stabilized zirconia ceramics in different thicknesses: use of try-in pastes and resin cements

Elif Yılmaz Biçer iD, Beyza Güney iD, Merve Bankoğlu Güngör iD

The Journal of Advanced Prosthodontics · 2026 · 18 (3) · 252

DOI: 10.4047/jap.2026.18.3.252 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of Advanced Prosthodontics, 2026. Verfasst von Elif Yılmaz Biçer und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthetic Dentistry, Faculty of Dentistry, Gazi University, Ankara, Türkiye. Die Arbeit nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The objective of the present in vitro study is to evaluate the color prediction of shade-gradient 5 mol% yttria-partially stabilized zirconia (5Y-PSZ) ceramics in different thicknesses using try-in pastes, unpolymerized resin cements, and polymerized resin cements. MATERIALS AND METHODS.Specimens with thicknesses of 0.4 mm, 0.6 mm, and 0.8 mm were fabricated using 5Y-PSZ zirconia ceramic.Substructure specimens were prepared from composite resin in A1 shade.Color parameters were measured after try-in paste application, before resin cement polymerization, and after resin cement polymerization.The color differences between the try-in paste and the unpolymerized resin cement (ΔE 00 -1), the try-in paste and the polymerized resin cement (ΔE 00 -2), and the unpolymerized resin cement and polymerized resin cement (ΔE 00 -3) were calculated using the CIEDE2000 formula.Data were statistically analyzed using the two-way repeated-measures ANOVA and the Bonferroni adjustment (α = 0.05). RESULTS.Two-way repeated-measures ANOVA revealed no interaction between thickness and prediction method (P = .128),but both factors significantly affected ΔE 00 values (P < .05).Among the thickness groups, 0.4 mm specimens showed the highest ΔE 00 values (1.45 ±0.9), while 0.6 mm and 0.8 mm specimens demonstrated significantly lower ΔE 00 values (P < .05).Regarding the prediction method, all groups showed statistically significant differences (P < .05),with ΔE 00 -1 exhibiting the highest ΔE 00 value (1.38 ±0.7), followed by ΔE 00 -2 and ΔE 00 -3. CONCLUSION.In thin restorations (0.4 mm), color prediction became more challenging.Visually perceptible color differences were observed among try-in pastes and resin cements after polymerization; therefore, the use of unpolymerized resin cement yielded more reliable color prediction.[

Schlagwörter

Stichwörter der Autor:innen

ColorPolymerizationResin cementZirconia

Autor:innen und Institutionen

  • Department of Prosthetic Dentistry, Faculty of Dentistry, Gazi University, Ankara, Türkiye.

ORCID-Profile: Elif Yılmaz Biçer, Beyza Güney, Merve Bankoğlu Güngör

Zitieren

APA

Yılmaz Biçer, E., Güney, B., & Bankoğlu Güngör, M. (2026). In vitro color prediction of the shade-gradient 5 mol% yttria-partially stabilized zirconia ceramics in different thicknesses: use of try-in pastes and resin cements. The Journal of Advanced Prosthodontics, 18(3), 252. https://doi.org/10.4047/jap.2026.18.3.252

Vancouver

Yılmaz Biçer E, Güney B, Bankoğlu Güngör M. In vitro color prediction of the shade-gradient 5 mol% yttria-partially stabilized zirconia ceramics in different thicknesses: use of try-in pastes and resin cements. The Journal of Advanced Prosthodontics. 2026;18(3):252. doi:10.4047/jap.2026.18.3.252

BibTeX
@article{YlmazBier2026,
  author = {Yılmaz Biçer, Elif and Güney, Beyza and Bankoğlu Güngör, Merve},
  title = {In vitro color prediction of the shade-gradient 5 mol% yttria-partially stabilized zirconia ceramics in different thicknesses: use of try-in pastes and resin cements},
  journal = {The Journal of Advanced Prosthodontics},
  year = {2026},
  volume = {18},
  number = {3},
  pages = {252},
  doi = {10.4047/jap.2026.18.3.252}
}
Kostenlos starten →