EUVIMEDEUVIMED entdecken
Crossref

Mechanical Properties and Microstructural Analysis of AISI 304 and Duplex 2550 Welded by GTAW and SMAW Techniques

Syukran Syukran, Winarto Winarto, Muhammad Anis

Materials Science Forum · 25.06.2026 · 1195 · 23-32

DOI: 10.4028/p-yxnq87 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science Forum, online erschienen am 25.06.2026. Verfasst von Syukran Syukran und 2 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the mechanical properties and microstructure of dissimilar welds between AISI 304 and Duplex 2550 using GTAW and SMAW processes with filler metals ER309 and E309-16. The weld joint exhibited a tensile strength of 508.7 MPa, lower than AISI 304's minimum of 515 MPa and Duplex 2550's 760 MPa, primarily due to the heat-affected zone (HAZ). Significant differences in hardness were observed, with the weld metal averaging 194.8 HV, compared to 181.9 HV and 229.9 HV for the HAZ of AISI 304 and Duplex 2550, respectively. Charpy tests indicated reduced impact energy and absorption in the weld metal and HAZ compared to the base metal. XRD analysis revealed the formation of intermetallic phases, including chi (χ), sigma (σ), and carbides in the weld metal, which compromised mechanical properties and corrosion resistance.

Zitieren

APA

Syukran, S., Winarto, W., & Anis, M. (2026). Mechanical Properties and Microstructural Analysis of AISI 304 and Duplex 2550 Welded by GTAW and SMAW Techniques. Materials Science Forum, 1195, 23-32. https://doi.org/10.4028/p-yxnq87

Vancouver

Syukran S, Winarto W, Anis M. Mechanical Properties and Microstructural Analysis of AISI 304 and Duplex 2550 Welded by GTAW and SMAW Techniques. Materials Science Forum. 2026;1195:23-32. doi:10.4028/p-yxnq87

BibTeX
@article{Syukran2026,
  author = {Syukran, Syukran and Winarto, Winarto and Anis, Muhammad},
  title = {Mechanical Properties and Microstructural Analysis of AISI 304 and Duplex 2550 Welded by GTAW and SMAW Techniques},
  journal = {Materials Science Forum},
  year = {2026},
  volume = {1195},
  pages = {23--32},
  doi = {10.4028/p-yxnq87}
}
Kostenlos starten →