EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Stage Roller Embossing of Bipolar Plate Microchannels Using 3D-Printed Tooling

Maziar Khademi, Peng Neo Zhang, Michael P. Pereira, Matthias Weiss

Solid State Phenomena · 16.04.2026 · 389 · 191-206

DOI: 10.4028/p-y78kvu ↗

Kurz gefasst

Fachartikel in der Zeitschrift Solid State Phenomena, online erschienen am 16.04.2026. Verfasst von Maziar Khademi und 3 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Bipolar plates are key components in fuel cells, and their performance strongly depends on the geometry of the microchannels used to distribute reactant gases. Producing channels with sufficient depth in thin metal sheets remains challenging, particularly when cost-effective manufacturing routes are required. This work investigates a multi-stage roller embossing process for forming bipolar plate channels using additively manufactured polymer tools. By dividing the total deformation into multiple forming stages, the process reduces tool deflection that typically limits channel depth in single-pass embossing. Experiments conducted on 0.1 mm stainless steel foil show that the multi-stage approach increases the achievable average channel depth from approximately 0.25 mm in a single pass to approximately 0.34 mm, resulting in a maximum aspect ratio (channel depth to width) of 0.314. These results indicate that combining multi-stage forming with 3D-printed tooling provides a practical route for flexible and low-cost fabrication of metallic bipolar plates, especially for low volume production.

Zitieren

APA

Khademi, M., Zhang, P. N., Pereira, M. P., & Weiss, M. (2026). Multi-Stage Roller Embossing of Bipolar Plate Microchannels Using 3D-Printed Tooling. Solid State Phenomena, 389, 191-206. https://doi.org/10.4028/p-y78kvu

Vancouver

Khademi M, Zhang PN, Pereira MP, Weiss M. Multi-Stage Roller Embossing of Bipolar Plate Microchannels Using 3D-Printed Tooling. Solid State Phenomena. 2026;389:191-206. doi:10.4028/p-y78kvu

BibTeX
@article{Khademi2026,
  author = {Khademi, Maziar and Zhang, Peng Neo and Pereira, Michael P. and Weiss, Matthias},
  title = {Multi-Stage Roller Embossing of Bipolar Plate Microchannels Using 3D-Printed Tooling},
  journal = {Solid State Phenomena},
  year = {2026},
  volume = {389},
  pages = {191--206},
  doi = {10.4028/p-y78kvu}
}
Kostenlos starten →