EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Nickel Ohmic Contacts Formed on 4H-SiC by UV Laser Annealing

Jean François Michaud, Clément Berger, Daniel Alquier

Solid State Phenomena · 22.08.2024 · 359 · 91-96

DOI: 10.4028/p-xqh9xb ↗

Kurz gefasst

Fachartikel in der Zeitschrift Solid State Phenomena, online erschienen am 22.08.2024. Verfasst von Jean François Michaud und 2 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 11 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Laser Thermal Annealing (LTA) is a key process step to improve the 4H-SiC devices by reducing their on-state resistance. In this study, we investigate the electrical, structural and morphological properties of nickel contact fabricated by LTA. A contact formed by a classical Rapid Thermal Annealing (RTA) was also fabricated as reference. Based on structural analysis, the phases formed by LTA do not match with RTA sample ones that has better ohmic properties. Nevertheless, the LTA contacts reach a specific contact resistance of 2.4×10 -5 Ω.cm 2 for an annealing at 4.75 J.cm ‑2 , which represents a significant improvement in comparison with our previous contacts fabricated with the same experimental protocol using titanium.

Zitieren

APA

Michaud, J. F., Berger, C., & Alquier, D. (2024). Nickel Ohmic Contacts Formed on 4H-SiC by UV Laser Annealing. Solid State Phenomena, 359, 91-96. https://doi.org/10.4028/p-xqh9xb

Vancouver

Michaud JF, Berger C, Alquier D. Nickel Ohmic Contacts Formed on 4H-SiC by UV Laser Annealing. Solid State Phenomena. 2024;359:91-96. doi:10.4028/p-xqh9xb

BibTeX
@article{Michaud2024,
  author = {Michaud, Jean François and Berger, Clément and Alquier, Daniel},
  title = {Nickel Ohmic Contacts Formed on 4H-SiC by UV Laser Annealing},
  journal = {Solid State Phenomena},
  year = {2024},
  volume = {359},
  pages = {91--96},
  doi = {10.4028/p-xqh9xb}
}
Kostenlos starten →