Processability and Solidification Microstructure of Al-10Si-4.5Mg Alloy Fabricated by Laser Powder Bed Fusion
Key Engineering Materials · 23.11.2023 · 964 · 53-58
DOI: 10.4028/p-n2qg2g ↗Kurz gefasst
Fachartikel in der Zeitschrift Key Engineering Materials, online erschienen am 23.11.2023. Verfasst von Yuki Otani und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 14 Literaturangaben.
Abstract (Originalsprache)
With the aim of developing a high-strength aluminum alloy for laser powder bed fusion (L-PBF), an Al–10Si–4.5Mg alloy with the a-Al/Si/Mg 2 Si three-phase microstructure was investigated. The Al–10Si–4.5Mg alloy processed by L-PBF exhibited a fine cellular microstructure including fine granular Mg 2 Si phases, and therefore exhibited a higher hardness of 187 HV0.1 than those of the conventional Al–Si–Mg alloy. However, cracks were macroscopically propagated between the internal fabrication voids along the melt pool boundaries in the L-PBF processed samples, resulting in a limited relative density below 95.5%. The cracking could be attributed to the relatively coarse Mg 2 Si particles decorated with the eutectic network. Although the improved strength suggests the advantage of strengthening by the Mg 2 Si phase, further optimization of the processing conditions will be required to manufacture the intact L-PBF parts.
Zitieren
APA
Otani, Y., Takata, N., Suzuki, A., Kobashi, M., & Kato, M. (2023). Processability and Solidification Microstructure of Al-10Si-4.5Mg Alloy Fabricated by Laser Powder Bed Fusion. Key Engineering Materials, 964, 53-58. https://doi.org/10.4028/p-n2qg2g
Vancouver
Otani Y, Takata N, Suzuki A, Kobashi M, Kato M. Processability and Solidification Microstructure of Al-10Si-4.5Mg Alloy Fabricated by Laser Powder Bed Fusion. Key Engineering Materials. 2023;964:53-58. doi:10.4028/p-n2qg2g
BibTeX
@article{Otani2023,
author = {Otani, Yuki and Takata, Naoki and Suzuki, Asuka and Kobashi, Makoto and Kato, Masaki},
title = {Processability and Solidification Microstructure of Al-10Si-4.5Mg Alloy Fabricated by Laser Powder Bed Fusion},
journal = {Key Engineering Materials},
year = {2023},
volume = {964},
pages = {53--58},
doi = {10.4028/p-n2qg2g}
}
EUVIMED