Effect of Copper Chloride on Phase Structure and Properties of Synthesized Materials from Flue Gas Desulfurization Gypsum
Key Engineering Materials · 10.07.2024 · 983 · 17-22
DOI: 10.4028/p-l9cqrk ↗Kurz gefasst
Fachartikel in der Zeitschrift Key Engineering Materials, online erschienen am 10.07.2024. Verfasst von Teeratada Yanwattana und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 10 Literaturangaben.
Abstract (Originalsprache)
This research investigates the influence of crystal modifying agent, copper chloride (CuCl 2 ) (0.3, 0.45, and 0.6 g), on the phase structure and characteristics of materials derived from flue gas desulfurization (FGD) gypsum. The raw material underwent hydrothermal transformation with 0.01 M H 2 SO 4 at 90°C for 1 hour. XRD analysis revealed a notable shift in phase structure from hexagonal calcium sulfate dihydrate (DH) in FGD gypsum to monoclinic calcium sulfate hemihydrate (alpha-HH) up to 91%in the synthesized products, with an increasing CuCl 2 content. SEM analysis revealed the elongated whisker-shaped particles (110.70 µ m to 207.90 µ m) of alpha-HH with higher CuCl 2 concentrations. Specifically, when incorporating 0.6 g of CuCl 2 in 0.01 M H 2 SO 4 at 90°C, the longest alpha-HH crystals resulted in the cast plaster with the highest flexural strength of approximately 4.92 MPa, demonstrating suitability for applications requiring sufficient mechanical strength. Thermal analysis confirmed the complete conversion of the solid phase to alpha-HH at 1200°C. Additionally, the study revealed that higher CuCl 2 content led to shorter setting time. These results suggest potential applications of the present synthesized materials from FGD gypsum in industries such as ceramics casting and dental materials, where precise control over material properties is critical.
Zitieren
APA
Yanwattana, T., Soykeabkaew, N., Duangphet, S., Chumphongphan, S., Intatha, U., & Tawichai, N. (2024). Effect of Copper Chloride on Phase Structure and Properties of Synthesized Materials from Flue Gas Desulfurization Gypsum. Key Engineering Materials, 983, 17-22. https://doi.org/10.4028/p-l9cqrk
Vancouver
Yanwattana T, Soykeabkaew N, Duangphet S, Chumphongphan S, Intatha U, Tawichai N. Effect of Copper Chloride on Phase Structure and Properties of Synthesized Materials from Flue Gas Desulfurization Gypsum. Key Engineering Materials. 2024;983:17-22. doi:10.4028/p-l9cqrk
BibTeX
@article{Yanwattana2024,
author = {Yanwattana, Teeratada and Soykeabkaew, Nattakan and Duangphet, Sitthi and Chumphongphan, Somwan and Intatha, Uraiwan and Tawichai, Nattaya},
title = {Effect of Copper Chloride on Phase Structure and Properties of Synthesized Materials from Flue Gas Desulfurization Gypsum},
journal = {Key Engineering Materials},
year = {2024},
volume = {983},
pages = {17--22},
doi = {10.4028/p-l9cqrk}
}
EUVIMED