EUVIMEDEUVIMED entdecken
Crossref

Fiber Parameters Optimization from Waste PET Bottles for Enhanced Concrete Strength Using Response Surface Methodology

Omar Mezghanni, Jihen Mallek, Mohamed Fourati, Mamadou Diouf, Lala Brahim, Bilel Hadrich, Atef Daoud

International Journal of Engineering Research in Africa · 03.02.2026 · 78 · 49-62

DOI: 10.4028/p-kwun8l ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Engineering Research in Africa, online erschienen am 03.02.2026. Verfasst von Omar Mezghanni und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 33 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

’This study investigates the mechanical performance of concrete reinforced with recycled polyethylene terephthalate (PET) fibers obtained from discarded plastic bottles, aiming to promote sustainable waste reuse in construction materials. Previous studies on PET fiber reinforced concrete have mainly examined the influence of fiber length and content separately, without considering their combined effects on mechanical properties. In this work, the interactions between fiber length, volume fraction, and mechanical behavior were systematically analyzed using a Central Composite Design (CCD) within the framework of Response Surface Methodology (RSM). Concrete incorporating recycled PET fibers was evaluated at three volume fractions (0.3%, 0.8%, and 1.3%) and three lengths (20 mm, 40 mm, and 60 mm), while maintaining a constant water-to-cement ratio. Sixty specimens were tested to assess both fresh and hardened properties. The greatest loss of workability occurred for the mix containing 1.3% fibers with a length of 60 mm, corresponding to about a 25% reduction compared with the control. Response Surface Methodology (RSM) based on a Central Composite Design (CCD) identified 0.3% fiber content and 40 mm length as the optimal combination, representing the mix that simultaneously maximized both compressive (26 MPa) and tensile strengths (3 MPa) according to the predictive model.

Zitieren

APA

Mezghanni, O., Mallek, J., Fourati, M., Diouf, M., Brahim, L., Hadrich, B., & Daoud, A. (2026). Fiber Parameters Optimization from Waste PET Bottles for Enhanced Concrete Strength Using Response Surface Methodology. International Journal of Engineering Research in Africa, 78, 49-62. https://doi.org/10.4028/p-kwun8l

Vancouver

Mezghanni O, Mallek J, Fourati M, Diouf M, Brahim L, Hadrich B, et al. Fiber Parameters Optimization from Waste PET Bottles for Enhanced Concrete Strength Using Response Surface Methodology. International Journal of Engineering Research in Africa. 2026;78:49-62. doi:10.4028/p-kwun8l

BibTeX
@article{Mezghanni2026,
  author = {Mezghanni, Omar and Mallek, Jihen and Fourati, Mohamed and Diouf, Mamadou and Brahim, Lala and Hadrich, Bilel and Daoud, Atef},
  title = {Fiber Parameters Optimization from Waste PET Bottles for Enhanced Concrete Strength Using Response Surface Methodology},
  journal = {International Journal of Engineering Research in Africa},
  year = {2026},
  volume = {78},
  pages = {49--62},
  doi = {10.4028/p-kwun8l}
}
Kostenlos starten →