Strength–Permeability Optimization of FA–MK–NS Blended Pervious Concrete Based on Response Surface Methodology
Buildings · 21.08.2026 · 16 (16) · 3335
DOI: 10.3390/buildings16163335 ↗Kurz gefasst
Fachartikel in der Zeitschrift Buildings, online erschienen am 21.08.2026. Verfasst von Junru Liu und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering Research Center Project of the Shaanxi Provincial Department of Education, China.
Abstract (Originalsprache)
Pervious concrete must balance mechanical capacity with interconnected voids required for drainage. A three-factor, three-level Box–Behnken design examined fly ash (FA; 10–20%), metakaolin (MK; 5–15%), and nano-silica (NS; 0.5–1.5%) at a fixed total binder content of 380 kg/m3. Compressive strength, water-accessible open porosity, and the apparent permeability coefficient ranged from 16.80 to 28.20 MPa, 14.07 to 24.50%, and 2.20 to 7.29 mm/s, respectively. Quadratic models for compressive strength and the apparent permeability coefficient were statistically adequate (R2 = 0.9907 and 0.9861); the porosity model showed significant lack of fit. The porosity model was retained only for local trend interpretation and excluded from optimization. In a researcher-defined design scenario that maximized strength while targeting an apparent permeability coefficient of 3.00 mm/s, desirability analysis selected a model-predicted compromise solution containing 14.038% FA, 12.556% MK, and 1.483% NS, with a predicted compressive strength and an apparent permeability coefficient of 28.233 MPa and 3.000 mm/s. The NS factor was close to the upper boundary, and the solution was not experimentally validated. Selected single-field SEM observations illustrated local differences among M5, M7, and M12, while selected-area EDS sum spectra provided only local elemental composition information. The results indicate potential for future pavement evaluation after independent validation, multi-field microstructural analysis, durability testing, and economic assessment.
Förderung
- Engineering Research Center Project of the Shaanxi Provincial Department of Education, China
Zitieren
APA
Liu, J., Bakri, Z., Li, F., & Jaffar, S. T. A. (2026). Strength–Permeability Optimization of FA–MK–NS Blended Pervious Concrete Based on Response Surface Methodology. Buildings, 16(16), 3335. https://doi.org/10.3390/buildings16163335
Vancouver
Liu J, Bakri Z, Li F, Jaffar STA. Strength–Permeability Optimization of FA–MK–NS Blended Pervious Concrete Based on Response Surface Methodology. Buildings. 2026;16(16):3335. doi:10.3390/buildings16163335
BibTeX
@article{Liu2026,
author = {Liu, Junru and Bakri, Zulhazmee and Li, Fang and Jaffar, Syed Taseer Abbas},
title = {Strength–Permeability Optimization of FA–MK–NS Blended Pervious Concrete Based on Response Surface Methodology},
journal = {Buildings},
year = {2026},
volume = {16},
number = {16},
pages = {3335},
doi = {10.3390/buildings16163335}
}
EUVIMED