EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Tool Edge Geometry on Sheared Surface Formation in Blanking of Oxygen-Free Copper

Tomomi Shiratori, Yuta Ichiyanagi, Kaname Watanabe, Aizawa Tatsuhiko

Solid State Phenomena · 15.04.2026 · 388 · 113-120

DOI: 10.4028/p-kfl1xm ↗

Kurz gefasst

Fachartikel in der Zeitschrift Solid State Phenomena, online erschienen am 15.04.2026. Verfasst von Tomomi Shiratori und 3 weiteren Autor:innen. Die Arbeit nennt 8 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

An oxygen-free copper has been utilized as a terminal material in the power transistors and their related electric system in the electric mobiles because of its high electric conductivity and excellent engineering durability in high current usage. The high ductility and its low mechanical strength cause large shear droop and increase of fractured surface. In this report, the shearing of oxygen-free copper was carried out using a punch with a mirror-finished surface roughness. Using the punch tip deflection as a parameter, a comparison of shearing characteristics was made between a punch with a nitrided tool surface and an untreated punch. The influence on the formation of the sheared surface was considered from an investigation of the shearing characteristics. When shearing oxygen-free copper with a thickness of 500 µm, it was shown that by providing a punch tip deflection of approximately one-tenth of the thickness in the punch stroke direction, the shear droop could be kept to 10 % or less of the plate thickness and a burnished surface ratio was approximately kept 90 %.

Zitieren

APA

Shiratori, T., Ichiyanagi, Y., Watanabe, K., & Tatsuhiko, A. (2026). Effect of Tool Edge Geometry on Sheared Surface Formation in Blanking of Oxygen-Free Copper. Solid State Phenomena, 388, 113-120. https://doi.org/10.4028/p-kfl1xm

Vancouver

Shiratori T, Ichiyanagi Y, Watanabe K, Tatsuhiko A. Effect of Tool Edge Geometry on Sheared Surface Formation in Blanking of Oxygen-Free Copper. Solid State Phenomena. 2026;388:113-120. doi:10.4028/p-kfl1xm

BibTeX
@article{Shiratori2026,
  author = {Shiratori, Tomomi and Ichiyanagi, Yuta and Watanabe, Kaname and Tatsuhiko, Aizawa},
  title = {Effect of Tool Edge Geometry on Sheared Surface Formation in Blanking of Oxygen-Free Copper},
  journal = {Solid State Phenomena},
  year = {2026},
  volume = {388},
  pages = {113--120},
  doi = {10.4028/p-kfl1xm}
}
Kostenlos starten →