EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Hybrid Analysis of Tool Geometry and Process Noise in Fine Blanking through Simulation and Experiment

Daria Gelbich, Frank Schweinshaupt, Thomas Stoel, Philipp Niemietz, Tim Herrig, Thomas Bergs

Solid State Phenomena · 16.04.2026 · 389 · 305-318

DOI: 10.4028/p-k95d4n ↗

Kurz gefasst

Fachartikel in der Zeitschrift Solid State Phenomena, online erschienen am 16.04.2026. Verfasst von Daria Gelbich und 5 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In fine blanking, a mass production process for safety-critical components, a discrepancy exists between deterministic modeling approaches and the stochastic nature of real-world measurements, often termed process noise. This work combines Finite Element Method simulations with data from industrial-scale fine blanking experiments, featuring long stroke series across multiple coils with systematically varied die clearances. The analysis shows a strong correlation between force curve characteristics and the formation of tears, a relationship that holds across all tested geometries. In contrast, only weak and inconsistent correlations were found between the force signal and the resulting die roll. This weakness is explained by the finding that multiple physical effects, such as material strength and friction, have competing influences on die roll that are not separable in the single force signal. These results demonstrate that the utility of the force signal for quality prediction is highly dependent on the tool geometry, providing a basis for more reliable tool design strategies in fine blanking.

Zitieren

APA

Gelbich, D., Schweinshaupt, F., Stoel, T., Niemietz, P., Herrig, T., & Bergs, T. (2026). Hybrid Analysis of Tool Geometry and Process Noise in Fine Blanking through Simulation and Experiment. Solid State Phenomena, 389, 305-318. https://doi.org/10.4028/p-k95d4n

Vancouver

Gelbich D, Schweinshaupt F, Stoel T, Niemietz P, Herrig T, Bergs T. Hybrid Analysis of Tool Geometry and Process Noise in Fine Blanking through Simulation and Experiment. Solid State Phenomena. 2026;389:305-318. doi:10.4028/p-k95d4n

BibTeX
@article{Gelbich2026,
  author = {Gelbich, Daria and Schweinshaupt, Frank and Stoel, Thomas and Niemietz, Philipp and Herrig, Tim and Bergs, Thomas},
  title = {Hybrid Analysis of Tool Geometry and Process Noise in Fine Blanking through Simulation and Experiment},
  journal = {Solid State Phenomena},
  year = {2026},
  volume = {389},
  pages = {305--318},
  doi = {10.4028/p-k95d4n}
}
Kostenlos starten →