Hybrid Hemp/Carbon Fiber Reinforced Composites: Manufacturing, Mechanical Behaviour and Environmental Assessment
Materials Science Forum · 17.04.2026 · 1187 · 1-15
DOI: 10.4028/p-jn0wa7 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Science Forum, online erschienen am 17.04.2026. Verfasst von Dario de Fazio und 7 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study analysed the mechanical performances and the environmental sustainability of hybrid hemp/carbon fibre reinforced polymer composites produced adopting different stacking sequences. In this context, three carbon layers were replaced with hemp ones and were positioned either at the mid-plane of the laminate in a symmetric configuration (S sample) and near to the external side of the composite material in an asymmetric configuration (A-HC sample). Additional full carbon sample (CFRP) and hemp sample (HFRP) were manufactured and used as reference materials. The mechanical behaviour of these materials was investigated through flexural, interlaminar shear and low-velocity impact (LVI) tests, and a cradle-to-grave Life Cycle Assessment (LCA) analysis was performed to quantify their environmental impacts in terms of Global Warming Potential (GWP). The experimental results revealed that hemp/carbon hybridisation in composite systems makes it possible to achieve a trade-off between mechanical performances and sustainability. Some of the investigated hybrid configurations exhibited mechanical properties comparable to conventional CFRPs thanks to strength, stiffness and enhanced energy absorption capability which depend on the stacking strategy and the presence of natural fibres that contribute to the damage mitigation. From an environmental perspective, thanks to numerous advantages in the use of hemp fibres, hybrid solutions significantly reduce the global warming potential compared to CFRPs, confirming that hemp/carbon hybridisation represents a promising strategy to balance structural performance and environmental.
Zitieren
APA
Fazio, D. D., Bianchi, I., Boccarusso, L., Durante, M., Mignanelli, C., Panico, M., Pinto, F., & Simoncini, M. (2026). Hybrid Hemp/Carbon Fiber Reinforced Composites: Manufacturing, Mechanical Behaviour and Environmental Assessment. Materials Science Forum, 1187, 1-15. https://doi.org/10.4028/p-jn0wa7
Vancouver
Fazio DD, Bianchi I, Boccarusso L, Durante M, Mignanelli C, Panico M, et al. Hybrid Hemp/Carbon Fiber Reinforced Composites: Manufacturing, Mechanical Behaviour and Environmental Assessment. Materials Science Forum. 2026;1187:1-15. doi:10.4028/p-jn0wa7
BibTeX
@article{Fazio2026,
author = {Fazio, Dario de and Bianchi, Iacopo and Boccarusso, Luca and Durante, Massimo and Mignanelli, Chiara and Panico, Martina and Pinto, Fulvio and Simoncini, Michela},
title = {Hybrid Hemp/Carbon Fiber Reinforced Composites: Manufacturing, Mechanical Behaviour and Environmental Assessment},
journal = {Materials Science Forum},
year = {2026},
volume = {1187},
pages = {1--15},
doi = {10.4028/p-jn0wa7}
}
EUVIMED