EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Kenaf Fiber and Hemp Fiber Multi-Walled Carbon Nanotube Filler-Reinforced Epoxy-Based Hybrid Composites for Biomedical Applications: Morphological and Mechanical Characterization

Praveena Bindiganavile Anand, Santhosh Nagaraja, Nagendra Jayaram, Shashank Paidi Sreenivasa, Naif Almakayeel, T. M. Yunus Khan, Raman Kumar, Raman Kumar, Muhammad Imam Ammarullah

Journal of Composites Science · 07.08.2023 · 7 (8) · 324

DOI: 10.3390/jcs7080324 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composites Science, online erschienen am 07.08.2023. Verfasst von Praveena Bindiganavile Anand und 8 weiteren Autor:innen. Die Arbeit wurde bisher 78-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: King Khalid University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study used a hybrid combination of kenaf and hemp fibers and the multi-walled carbon nanotube (MWCNT) reinforcements in the matrix phase to synthesize the composites. A kenaf/hemp fiber blend with MWCNTs in epoxy was used for the specific concentration. The procedure used three composite materials chosen from pilot trials. The ratio of MWCNT filler particles was altered up to the agglomeration limit based on initial trials. Two specimens (2 and 3) were supplemented with MWCNTs in a concentration range of 0.5 wt. % to 1 wt. %, with the fiber concentration being maintained in equilibrium with the epoxy resin, all of the materials were tested under the same conditions. The hybrid nanocomposite was characterized for its morphological and mechanical properties; the tensile properties were higher for 1% MWCNTs concentration (specimen 2), while the flexural properties were higher for 0.5% MWCNTs, with values of 43.24 MPa and 55.63 MPa, correspondingly. Once the MWCNT concentration was increased to 1 wt. %, the maximum impact strength was achieved (specimen 3). In the limits of the Shore-D scale, the kenaf fiber and hemp fiber matrix composite (specimen 1) gained a hardness index of 84. Scanning electron microscopy was carried out to analyze the morphological features of the fractured samples and to assess the adhesion between the fiber, matrix, and surface. Among the various fillers tested, the kenaf fiber/hemp/MWCNT composite (specimen 3) demonstrated superior binding and reduced the incidence of fiber pull-out, breakage, and voids. In addition to the comparative analysis, the addition of 0.5 wt. % MWCNTs resulted in better mechanical properties compared to the other two combinations.

Förderung

  • King Khalid University

Zitieren

APA

Anand, P. B., Nagaraja, S., Jayaram, N., Sreenivasa, S. P., Almakayeel, N., Khan, T. M. Y., Kumar, R., Kumar, R., & Ammarullah, M. I. (2023). Kenaf Fiber and Hemp Fiber Multi-Walled Carbon Nanotube Filler-Reinforced Epoxy-Based Hybrid Composites for Biomedical Applications: Morphological and Mechanical Characterization. Journal of Composites Science, 7(8), 324. https://doi.org/10.3390/jcs7080324

Vancouver

Anand PB, Nagaraja S, Jayaram N, Sreenivasa SP, Almakayeel N, Khan TMY, et al. Kenaf Fiber and Hemp Fiber Multi-Walled Carbon Nanotube Filler-Reinforced Epoxy-Based Hybrid Composites for Biomedical Applications: Morphological and Mechanical Characterization. Journal of Composites Science. 2023;7(8):324. doi:10.3390/jcs7080324

BibTeX
@article{Anand2023,
  author = {Anand, Praveena Bindiganavile and Nagaraja, Santhosh and Jayaram, Nagendra and Sreenivasa, Shashank Paidi and Almakayeel, Naif and Khan, T. M. Yunus and Kumar, Raman and Kumar, Raman and Ammarullah, Muhammad Imam},
  title = {Kenaf Fiber and Hemp Fiber Multi-Walled Carbon Nanotube Filler-Reinforced Epoxy-Based Hybrid Composites for Biomedical Applications: Morphological and Mechanical Characterization},
  journal = {Journal of Composites Science},
  year = {2023},
  volume = {7},
  number = {8},
  pages = {324},
  doi = {10.3390/jcs7080324}
}
Kostenlos starten →