Aluminum Alloy Hot Stamping and Forming Technology: A Review
Materials · 08.04.2025 · 18 (8) · 1694
DOI: 10.3390/ma18081694 ↗Kurz gefasst
Übersichtsarbeit in der Zeitschrift Materials, online erschienen am 08.04.2025. Verfasst von Ruolin Wu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Hubei Province Key Laboratory of Chemical Equipment Intensification and Intrinsic Safety, Wuhan Institute of Technology, Wuhan 430205, China. Die Arbeit wurde bisher 22-mal zitiert (Crossref) und nennt 205 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Key Project of Scientific Research Plan of Hubei Provincial Department of Education, Guiding Project of Scientific Research Plan of Hubei Provincial Department of Education.
Abstract (Originalsprache)
Aluminum alloy hot stamping technology has quickly become a research hotspot for many scholars due to its ability to solve key challenges such as poor formability, large rebound, and low dimensional accuracy of aluminum alloy sheets at room temperature. This work systematically reviews the progress of Hot-Forming-Quenching (HFQ®) technology and its optimization processes. The effects of key forming parameters are summarized, including temperature, forming rate, friction, and crimping force on the forming properties of aluminum alloys. Additionally, an ontological model of thermal deformation behavior and damage evolution during hot forming is analyzed. A multifactorial strength prediction model, integrating grain size and reinforcement mechanisms, is highlighted for its ability to accurately predict post-forming yield strength. To address the limitations of HFQ®, optimization methods for solid solution and aging heat-treatment stages are categorized and evaluated, along with their advantages and disadvantages. Furthermore, the latest advancements in two innovative hot stamping processes (Low-Temperature Hot Form and Quench (LT-HFQ®) and pre-hardened hot forming (PHF)) are reviewed. LT-HFQ® improves formability by pre-cooling the sheet while maintaining solution treatment, while PHF utilizes pre-hardened aluminum alloys, enabling brief heating, forming, and quenching to significantly reduce cycle time while ensuring component strength. Finally, by summarizing current technological progress and challenges, future directions for aluminum alloy hot stamping are outlined, including advancements in forming processes, material modeling, and optimization through multidisciplinary collaboration and artificial intelligence to drive further innovation.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Hubei Province Key Laboratory of Chemical Equipment Intensification and Intrinsic Safety, Wuhan Institute of Technology, Wuhan 430205, China.
- Hubei Provincial Engineering Technology Research Center of Green Chemical Equipment, Wuhan Institute of Technology, Wuhan 430205, China.
- School of Mechanical and Electrical Engineering, Wuhan Institute of Technology, Wuhan 430205, China.
Förderung
- National Natural Science Foundation of China
- Key Project of Scientific Research Plan of Hubei Provincial Department of Education
- Guiding Project of Scientific Research Plan of Hubei Provincial Department of Education
- Major Horizontal Scientific Research Projects
- Research Fund Program of Hubei Provincial Key Laboratory of Chemical Equipment Intensification and Intrinsic Safety
- Science Foundation of Wuhan Institute of Technology
Zitieren
APA
Wu, R., Dai, W., Luo, J., Li, M., Liu, Y., & Li, H. (2025). Aluminum Alloy Hot Stamping and Forming Technology: A Review. Materials, 18(8), 1694. https://doi.org/10.3390/ma18081694
Vancouver
Wu R, Dai W, Luo J, Li M, Liu Y, Li H. Aluminum Alloy Hot Stamping and Forming Technology: A Review. Materials. 2025;18(8):1694. doi:10.3390/ma18081694
BibTeX
@article{Wu2025,
author = {Wu, Ruolin and Dai, Wei and Luo, Jiake and Li, Mengxin and Liu, Yuan and Li, Huanhuan},
title = {Aluminum Alloy Hot Stamping and Forming Technology: A Review},
journal = {Materials},
year = {2025},
volume = {18},
number = {8},
pages = {1694},
doi = {10.3390/ma18081694}
}
EUVIMED