EUVIMEDDescoperă EUVIMED
Open access · CC BY 4.0

Profile Contour and Flatness Control Model for Hot Strip Rolling

Nelson Souto, Nicolas Legrand, Stephane Jimenez

Materials Science Forum · 2026-04-16 · 1186 · 85-96

DOI: 10.4028/p-ein5ft ↗

At a glance

Journal article in Materials Science Forum, published online on 2026-04-16. Written by Nelson Souto and 2 co-authors. 28 references. The full text is freely available (open access, CC BY 4.0).

RezumatDate bibliograficeCiteRelated studies

Abstract (original language)

A full Profile Contour and Flatness Control (PCFC) model prototype has been developed for hot finishing mills. This model prototype accounts for several physical based sub-models calculating the different contributions to the roll gap profile and allows for offline predictions in both preset and recalculation modes. To evaluate the PCFC model developed, an exhaustive comparison analysis between its calculations, the ones coming from the plant model and measures at the finishing mill exit has been carried out. An industrial mill database composed of different rolling campaign types was applied for this purpose and both (i) strip crown and flatness indicators as well as (ii) full strip profiles results have been used for the comparisons. Encouraging results were obtained from this performance assessment since the PFCF model developed leads to similar behavior compared to the existing plant’s model (from an industrial supplier). As a result, the PCFC model developed shows high potential for online implementation in hot strip mills.

Cite

APA

Souto, N., Legrand, N., & Jimenez, S. (2026). Profile Contour and Flatness Control Model for Hot Strip Rolling. Materials Science Forum, 1186, 85-96. https://doi.org/10.4028/p-ein5ft

Vancouver

Souto N, Legrand N, Jimenez S. Profile Contour and Flatness Control Model for Hot Strip Rolling. Materials Science Forum. 2026;1186:85-96. doi:10.4028/p-ein5ft

BibTeX
@article{Souto2026,
  author = {Souto, Nelson and Legrand, Nicolas and Jimenez, Stephane},
  title = {Profile Contour and Flatness Control Model for Hot Strip Rolling},
  journal = {Materials Science Forum},
  year = {2026},
  volume = {1186},
  pages = {85--96},
  doi = {10.4028/p-ein5ft}
}
Start for free →