EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Behavior of Lithium-Ion Battery Separators under Uniaxial and Biaxial Loading Conditions

Sahand Shamchi iD, Behzad V Farahani iD, Marian Bulla iD, Stefan Kolling iD

Polymers · 22.04.2024 · 16 (8) · 1174

DOI: 10.3390/polym16081174 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 22.04.2024. Verfasst von Sahand Shamchi und 3 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Mechanics and Materials, Technische Hochschule Mittelhessen, Wiesenstr. 14, 35390 Giessen, Germany. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hessian Ministry of Science and Art, Germany.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The mechanical integrity of two commercially available lithium-ion battery separators was investigated under uniaxial and biaxial loading conditions. Two dry-processed microporous films with polypropylene (PP)/polyethylene (PE)/polypropylene (PP) compositions were studied: Celgard H2010 Trilayer and Celgard Q20S1HX Ceramic-Coated Trilayer. The uniaxial tests were carried out along the machine direction (MD), transverse direction (TD), and diagonal direction (DD). In order to generate a state of in-plane biaxial tension, a pneumatic bulge test setup was prioritized over the commonly performed punch test in an attempt to eliminate the effects of contact friction. The biaxial flow stress–strain behavior of the membranes was deduced via the Panknin–Kruglov method coupled with a 3D Digital Image Correlation (DIC) technique. The findings demonstrate a high degree of in-plane anisotropy in both membranes. The ceramic coating was found to negatively affect the mechanical performance of the trilayer microporous separator, compromising its strength and stretchability, while preserving its failure mode. Derived from experimentally calibrated constitutive models, a finite element model was developed using the explicit solver OpenRadioss. The numerical model was capable of predicting the biaxial deformation of the semicrystalline membranes up until failure, showing a fairly good correlation with the experimental observations.

Schlagwörter

Stichwörter der Autor:innen

battery abuse tolerancebattery safetylithium-ion batteriespolymer separators

Autor:innen und Institutionen

  • Institute of Mechanics and Materials, Technische Hochschule Mittelhessen, Wiesenstr. 14, 35390 Giessen, Germany.
  • Soete Laboratory, EMSME Department, Faculty of Engineering and Architecture, Ghent University, 9052 Zwijnaarde, Belgium.
  • Altair Engineering GmbH, Josef-Lammerting-Allee 10, 50933 Cologne, Germany.

ORCID-Profile: Sahand Shamchi, Behzad V Farahani, Marian Bulla, Stefan Kolling

Förderung

  • Hessian Ministry of Science and Art, Germany

Zitieren

APA

Shamchi, S., Farahani, B. V., Bulla, M., & Kolling, S. (2024). Mechanical Behavior of Lithium-Ion Battery Separators under Uniaxial and Biaxial Loading Conditions. Polymers, 16(8), 1174. https://doi.org/10.3390/polym16081174

Vancouver

Shamchi S, Farahani BV, Bulla M, Kolling S. Mechanical Behavior of Lithium-Ion Battery Separators under Uniaxial and Biaxial Loading Conditions. Polymers. 2024;16(8):1174. doi:10.3390/polym16081174

BibTeX
@article{Shamchi2024,
  author = {Shamchi, Sahand and Farahani, Behzad V and Bulla, Marian and Kolling, Stefan},
  title = {Mechanical Behavior of Lithium-Ion Battery Separators under Uniaxial and Biaxial Loading Conditions},
  journal = {Polymers},
  year = {2024},
  volume = {16},
  number = {8},
  pages = {1174},
  doi = {10.3390/polym16081174}
}
Kostenlos starten →