Numerical Multiphysics CFD Modelling of Porosity Evolution in Thermoset Prepreg Microstructures
Defect and Diffusion Forum · 17.04.2026 · 451 · 1-10
DOI: 10.4028/p-5relxg ↗Kurz gefasst
Fachartikel in der Zeitschrift Defect and Diffusion Forum, online erschienen am 17.04.2026. Verfasst von Anne Lise Briard und 4 weiteren Autor:innen. Die Arbeit nennt 10 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Carbon Fiber Reinforced Polymers (CFRPs) are essential to the aerospace industry, offering superior strength-to-weight ratios. Currently, the manufacturing of primary structures via standard autoclave curing is a robust, mastered process that successfully minimizes defects, keeping porosity levels below critical thresholds (typically < 1 %). Consequently, porosity is generally not considered as an issue in standard, optimized production lines.However, this stability may be affected by emerging industrial paradigms aimed at increasing production rates and reducing costs. The shift toward accelerated manufacturing – characterized by rapid heating rates, shortened cure cycles and by new manufacturing processes – and the introduction of complex material architectures risk re-introducing significant porosity. In parallel, there is currently no numerical model capable of accurately predicting porosity formation and evolution under these complex conditions. Existing simulation approaches are typically macroscopic and rely on homogenized porous media assumptions, failing to capture the essential micro-scale interactions between bubbles and fibres.To address this gap, this study presents an extended, custom multi-physics Computational Fluid Dynamics (CFD) solver built upon an existing OpenFOAM framework. The goal is to provide the first predictive tool for void evolution within realistic microstructures. The numerical framework couples a two-phase compressible flow model with the complete thermo-chemo-rheological physics of thermoset curing.The solver is applied to 2D Representative Volume Elements (RVEs) of a prepreg ply. Simulations of a standard autoclave cycle demonstrated the solver's ability to capture micro-scale dynamics, showing how voids are compressed and transported during the resin viscosity drop before being frozen at gelation. A parametric study comparing 3-bars and 7-bars pressures confirmed the model's physical ability in predicting void volume reduction.While currently focused on mechanical compression, the tool is designed to support the development of future manufacturing cycles. Future work will incorporate moisture diffusion physics and includes experimental validation via X-ray micro-tomography and in-situ synchrotron monitoring.
Zitieren
APA
Briard, A. L., D'Elia, R., Berthet, F., Cheruet, A., & Schmidt, F. (2026). Numerical Multiphysics CFD Modelling of Porosity Evolution in Thermoset Prepreg Microstructures. Defect and Diffusion Forum, 451, 1-10. https://doi.org/10.4028/p-5relxg
Vancouver
Briard AL, D'Elia R, Berthet F, Cheruet A, Schmidt F. Numerical Multiphysics CFD Modelling of Porosity Evolution in Thermoset Prepreg Microstructures. Defect and Diffusion Forum. 2026;451:1-10. doi:10.4028/p-5relxg
BibTeX
@article{Briard2026,
author = {Briard, Anne Lise and D'Elia, Raffaele and Berthet, Florentin and Cheruet, Anthony and Schmidt, Fabrice},
title = {Numerical Multiphysics CFD Modelling of Porosity Evolution in Thermoset Prepreg Microstructures},
journal = {Defect and Diffusion Forum},
year = {2026},
volume = {451},
pages = {1--10},
doi = {10.4028/p-5relxg}
}
EUVIMED