EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Compactibility and Fibre Volume Fraction Limits of Unidirectional Discontinuous Carbon Fibre Thermoset Prepreg Laminates

Miriam Preinfalck, Julian Kupski, Mohammad Hajikazemi iD, Christian Brauner iD, Stephan Baz, Götz T Gresser

Polymers · 12.06.2026 · 18 (12) · 1472

DOI: 10.3390/polym18121472 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 12.06.2026. Verfasst von Miriam Preinfalck und 5 weiteren Autor:innen. Beteiligte Einrichtung: Deutsche Institute für Textil- und Faserforschung, Körschtalstraße 26, 73770 Denkendorf, Germany. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The aim of this study was to explore the compactibility of unidirectional staple carbon fibre laminates in comparison with their uni- and biaxial continuous fibre counterparts. Resin-preimpregnated plies were inserted into a heated compression mould at an elevated mould temperature of 110 °C. By applying stepwise loading, the correlation between consolidation pressure and fibre volume content was derived and related to fibre orientation distribution. The fibre orientation distribution is obtained from photographic image analyses of 2D ply sections of the same samples using the structure tensor approach. For commonly used autoclave prepreg pressure of 6.8 bar results indicate that lower-oriented staple carbon fibre unidirectional laminates with a fibre orientation distribution factor η0 = 0.74 can potentially reach a maximum of 39% fibre volume fraction, while higher-oriented laminates with η0 = 0.78 end up at 43%. An exponential extrapolation suggests that a consolidation pressure of ≥90 bar is required to achieve 60% fibre volume content with highly oriented unidirectional staple carbon fibre laminates.

Schlagwörter

Stichwörter der Autor:innen

fibre orientation distributionfibre volume contentply compactibilityrecycled carbon fibrestaple carbon fibrethermoset prepregunidirectional laminates

Autor:innen und Institutionen

  • Deutsche Institute für Textil- und Faserforschung, Körschtalstraße 26, 73770 Denkendorf, Germany.
  • Institute of Polymer Engineering, FHNW University of Applied Sciences and Arts Northwestern Switzerland, Klosterzelgstrasse 2, 5210 Windisch, Switzerland.

ORCID-Profile: Mohammad Hajikazemi, Christian Brauner

Zitieren

APA

Preinfalck, M., Kupski, J., Hajikazemi, M., Brauner, C., Baz, S., & Gresser, G. T. (2026). Compactibility and Fibre Volume Fraction Limits of Unidirectional Discontinuous Carbon Fibre Thermoset Prepreg Laminates. Polymers, 18(12), 1472. https://doi.org/10.3390/polym18121472

Vancouver

Preinfalck M, Kupski J, Hajikazemi M, Brauner C, Baz S, Gresser GT. Compactibility and Fibre Volume Fraction Limits of Unidirectional Discontinuous Carbon Fibre Thermoset Prepreg Laminates. Polymers. 2026;18(12):1472. doi:10.3390/polym18121472

BibTeX
@article{Preinfalck2026,
  author = {Preinfalck, Miriam and Kupski, Julian and Hajikazemi, Mohammad and Brauner, Christian and Baz, Stephan and Gresser, Götz T},
  title = {Compactibility and Fibre Volume Fraction Limits of Unidirectional Discontinuous Carbon Fibre Thermoset Prepreg Laminates},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {12},
  pages = {1472},
  doi = {10.3390/polym18121472}
}
Kostenlos starten →