Influence of Rolling Temperature on the Mechanical and Formability Properties of AA1050/AZ31/AA1050 Roll-Bonded Sheets
Materials Science Forum · 15.04.2026 · 1185 · 127-138
DOI: 10.4028/p-3pejey ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Science Forum, online erschienen am 15.04.2026. Verfasst von Mohamad El Mehtedi und 6 weiteren Autor:innen. Die Arbeit nennt 23 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
With the increasing demand for lightweight materials, the combination of aluminum and magnesium sheets enables the development of advanced laminates with a balanced combination of strength and ductility, making them suitable for forming applications. This work investigates the effect of rolling temperature on the mechanical behavior and formability of AA1050/AZ31/AA1050 sheets produced by roll bonding in the temperature range of 250–450°C. Tensile tests showed that the yield stress is weakly affected by rolling temperature, whereas the ultimate tensile strength increases up to 350°C and then stabilizes. The elongation at fracture increases monotonically with temperature, indicating improved ductility at higher rolling temperatures. Microhardness measurements revealed softening of the aluminum sheets with increasing temperature, while limited variations were observed in the AZ31 sheet. Formability was evaluated by Erichsen Cupping test. The maximum load and extension at break remained nearly constant over the investigated temperature range; however, higher rolling temperatures led to reduced delamination and improved interfacial bonding integrity during deformation. The results indicate that roll bonding at elevated temperatures promotes better strain distribution and enhanced bonding quality. Overall, roll bonding at 450°C provides the most favorable combination of mechanical performance, formability, and interfacial stability, making the produced sheets suitable for lightweight forming applications.
Zitieren
APA
Mehtedi, M. E., Buonadonna, P., Reggiani, B., Pelaccia, R., Donati, L., Loi, G., & Carta, M. (2026). Influence of Rolling Temperature on the Mechanical and Formability Properties of AA1050/AZ31/AA1050 Roll-Bonded Sheets. Materials Science Forum, 1185, 127-138. https://doi.org/10.4028/p-3pejey
Vancouver
Mehtedi ME, Buonadonna P, Reggiani B, Pelaccia R, Donati L, Loi G, et al. Influence of Rolling Temperature on the Mechanical and Formability Properties of AA1050/AZ31/AA1050 Roll-Bonded Sheets. Materials Science Forum. 2026;1185:127-138. doi:10.4028/p-3pejey
BibTeX
@article{Mehtedi2026,
author = {Mehtedi, Mohamad El and Buonadonna, Pasquale and Reggiani, Barbara and Pelaccia, Riccardo and Donati, Lorenzo and Loi, Gabriela and Carta, Mauro},
title = {Influence of Rolling Temperature on the Mechanical and Formability Properties of AA1050/AZ31/AA1050 Roll-Bonded Sheets},
journal = {Materials Science Forum},
year = {2026},
volume = {1185},
pages = {127--138},
doi = {10.4028/p-3pejey}
}
EUVIMED