EUVIMEDEUVIMED entdecken
Crossref

Formability assessment of magnesium AZ31 alloy sheets at room temperature during the incremental sheet forming process

Karthikeyan Gunasekaran, D Nagarajan, Klaudia Fekete, Kristián Máthis

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering · 06.06.2026

DOI: 10.1177/09544089261457520 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, online erschienen am 06.06.2026. Verfasst von Karthikeyan Gunasekaran und 3 weiteren Autor:innen. Die Arbeit nennt 65 Literaturangaben. Gefördert von: Science and Engineering Research Board.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Incremental sheet forming (ISF) has been adopted as a low-cost technique that can be utilised to create three-dimensional sheet forms with extremely short lead times. Unlike traditional forming, ISF is a die-less process which uses CNC and CAD files. It enhances the plastic deformation of hard-to-deform alloys such as titanium and magnesium by localised deformation. Magnesium (AZ31B) was tested using Erichsen cupping and the ISF to determine the maximum formability in 1.5 mm sheets, at ambient temperature. The depth obtained using the Erichsen cupping test was 2.88 mm. ISF with a spiral toolpath was performed until fracture with a range of feed rates (F) (50, 1000 and 2500 mm/min), spindle speeds (S) (50, 500 and 3000 rpm), and pitch sizes (P) (0.1, 0.5 and 2.5 mm). The optimum condition was found to be F50S3000P0.5, and the forming depth was 8.31 mm, which is approximately three times more than the conventional test. The experiments showed that an increase in the pitch size above 0.5 mm and feed rate above 50 mm/min tends to decrease the formability, whereas an increase in spindle speed to 3000 rpm increased the formability. The as-received sheet was found to be a strong basal texture material using electron backscatter diffraction (EBSD) and thus could not be strongly activated to undergo (10–12) tension twins. Nevertheless, in the ISF process, plane strain, biaxial stretching and frictional heating at high spindle speeds of 3000 rpm increased non-basal slip systems and extensive recrystallisation. These processes were highly effective in enhancing the formability of the alloy at ambient temperatures. Overall, the results can be used to demonstrate that the ISF process can form a 3-fold increment on magnesium and other alloys that are hard to form without losing their significant strength and properties, and it can be viewed as a potential alternative to traditional methods of sheet forming.

Förderung

  • Science and Engineering Research Board

Zitieren

APA

Gunasekaran, K., Nagarajan, D., Fekete, K., & Máthis, K. (2026). Formability assessment of magnesium AZ31 alloy sheets at room temperature during the incremental sheet forming process. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089261457520

Vancouver

Gunasekaran K, Nagarajan D, Fekete K, Máthis K. Formability assessment of magnesium AZ31 alloy sheets at room temperature during the incremental sheet forming process. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. 2026. doi:10.1177/09544089261457520

BibTeX
@article{Gunasekaran2026,
  author = {Gunasekaran, Karthikeyan and Nagarajan, D and Fekete, Klaudia and Máthis, Kristián},
  title = {Formability assessment of magnesium AZ31 alloy sheets at room temperature during the incremental sheet forming process},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering},
  year = {2026},
  doi = {10.1177/09544089261457520}
}
Kostenlos starten →