Evaluation of bonding methods on shear bond strength between cobalt-chromium and titanium alloys fabricated by selective laser melting and denture base resins
Dental Materials Journal · 2025
DOI: 10.4012/dmj.2025-093 ↗Kurz gefasst
Fachartikel in der Zeitschrift Dental Materials Journal, 2025. Verfasst von Yuji Uchida und 4 weiteren Autor:innen. Beteiligte Einrichtung: Advanced Prosthodontics, Oral Health Sciences, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo. Hauptthemen laut MEDLINE: Dental Bonding, Chromium Alloys, Lasers, Titanium. Die Arbeit nennt 43 Literaturangaben.
Abstract (Originalsprache)
This study evaluated the shear bond strength (SBS) between cobalt-chromium (CoCr) and titanium (Ti) alloys fabricated via selective laser melting (SLM) and denture base resins with different bonding methods. After surface pretreatment of cylindrical CoCr and Ti alloy specimens, bonding was performed using three methods: the compression molding (CM) method, the pouring (PT) method, and the method using 4-META/MMA-TBB resin (SB). SBS tests were performed after storing all specimens in distilled water at 37ºC for 24 h, either immediately or following 10,000 thermocycles. For CoCr alloys, without thermocycling, the CM method exhibited significantly higher SBS than SB method (p
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- Advanced Prosthodontics, Oral Health Sciences, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo.
- Digital Dentistry, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo.
- Oral Biomedical Engineering, Graduate School of Medical and Dental Sciences, Institute of Science Tokyo.
Zitieren
APA
Uchida, Y., Takaichi, A., Kajima, Y., Takahashi, H., & Wakabayashi, N. (2025). Evaluation of bonding methods on shear bond strength between cobalt-chromium and titanium alloys fabricated by selective laser melting and denture base resins. Dental Materials Journal. https://doi.org/10.4012/dmj.2025-093
Vancouver
Uchida Y, Takaichi A, Kajima Y, Takahashi H, Wakabayashi N. Evaluation of bonding methods on shear bond strength between cobalt-chromium and titanium alloys fabricated by selective laser melting and denture base resins. Dental Materials Journal. 2025. doi:10.4012/dmj.2025-093
BibTeX
@article{Uchida2025,
author = {Uchida, Yuji and Takaichi, Atsushi and Kajima, Yuka and Takahashi, Hidekazu and Wakabayashi, Noriyuki},
title = {Evaluation of bonding methods on shear bond strength between cobalt-chromium and titanium alloys fabricated by selective laser melting and denture base resins},
journal = {Dental Materials Journal},
year = {2025},
doi = {10.4012/dmj.2025-093}
}
EUVIMED