EUVIMEDОткрийте EUVIMED
Crossref

AN EXPERIMENTAL ANALYSIS OF COMPRESSIVE STRENGTH AND SHRINKAGE IN HIGH-VOLUME FLY ASH CONCRETE

Yuyun Tajunnisa, Satria Bagus Pamungkas, Yosi Noviari Wibowo, Auliagitta Kumala Apsari, Hazen Masrafat

Journal of Green Building · 2026 · 21 (3) · 49-62

DOI: 10.3992/jgb.21.3.49 ↗

At a glance

Journal article in Journal of Green Building, 2026. Written by Yuyun Tajunnisa and 4 co-authors. 23 references.

РезюмеБиблиографски данниCiteRelated studies

Abstract (original language)

Concrete is the most widely used construction material because of its diverse applications, and its current global consumption is approximately 15 billion tons. Many countries have advanced efforts to reduce the carbon footprint in the construction sector, which is significant because of the high energy consumption and greenhouse gas emissions, particularly from cement. Global cement production currently stands at approximately 4.2 billion tons and is projected to reach 5.5 billion tons by 2050. One way to address fly ash waste is to reduce the proportion of cement in the mixture. However, the use of ready-mix concrete with fly ash often results in cracking, even before loading, despite the concrete meeting quality standards. Shrinkage is commonly used to measure the volume stability of concrete, which is affected by changes in moisture, chemical reactions, and temperature. High-volume fly ash concrete generally exhibits lower shrinkage than conventional concrete, undoubtedly due to the low water content used in its production. This study compares three variations of fly ash contents of 40%, 50%, and 60% with normal concrete without fly ash, incorporating a superplasticizer at 1% of the binder weight. Compressive strength testing of the concrete was conducted according to SNI 1974 on cylinder samples measuring 100 × 200 mm at 7, 14, 28, and 56 days. Drying shrinkage testing based on ASTM C 157 was performed on beam samples measuring 7.5 × 7.5 × 28.5 cm on days 4, 7, 14, 21, and 28. The results showed that the higher the fly ash content, the lower the compressive strength of the concrete. The compressive strengths for fly ash contents of 40%, 50%, 60%, and normal concrete without fly ash were 51.68, 41.8, 37.21, and 29.7 MPa, respectively. The replacement of cement with fly ash reduced the drying shrinkage compared to ordinary concrete. Shrinkage of 40%, 50%, and 60% fly ash contents reached 0.071%, 0.0593%, and 0.0261% within the first 4 days, and 0.1004%, 0.0807%, and 0.0772% on the 28th day. Increasing the percentage of fly ash significantly reduced the shrinkage, with FA60 exhibiting the lowest shrinkage value among all samples.

Cite

APA

Tajunnisa, Y., Pamungkas, S. B., Wibowo, Y. N., Apsari, A. K., & Masrafat, H. (2026). AN EXPERIMENTAL ANALYSIS OF COMPRESSIVE STRENGTH AND SHRINKAGE IN HIGH-VOLUME FLY ASH CONCRETE. Journal of Green Building, 21(3), 49-62. https://doi.org/10.3992/jgb.21.3.49

Vancouver

Tajunnisa Y, Pamungkas SB, Wibowo YN, Apsari AK, Masrafat H. AN EXPERIMENTAL ANALYSIS OF COMPRESSIVE STRENGTH AND SHRINKAGE IN HIGH-VOLUME FLY ASH CONCRETE. Journal of Green Building. 2026;21(3):49-62. doi:10.3992/jgb.21.3.49

BibTeX
@article{Tajunnisa2026,
  author = {Tajunnisa, Yuyun and Pamungkas, Satria Bagus and Wibowo, Yosi Noviari and Apsari, Auliagitta Kumala and Masrafat, Hazen},
  title = {AN EXPERIMENTAL ANALYSIS OF COMPRESSIVE STRENGTH AND SHRINKAGE IN HIGH-VOLUME FLY ASH CONCRETE},
  journal = {Journal of Green Building},
  year = {2026},
  volume = {21},
  number = {3},
  pages = {49--62},
  doi = {10.3992/jgb.21.3.49}
}
Start for free →