Air Annealing Effects on Spray-Deposited CuO Thin Films and p-CuO/n-Si Heterojunction Photo Response
International Journal of Innovative Science and Research Technology · 19.08.2026 · 982
DOI: 10.38124/ijisrt/26aug608 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Innovative Science and Research Technology, online erschienen am 19.08.2026. Verfasst von Madhukeswara R. S.. Die Arbeit nennt 6 Literaturangaben.
Abstract (Originalsprache)
CuO thin films were deposited on quartz and Si substrates by spray pyrolysis using a 0.1 M copper acetate precursor at a substrate temperature of 350 °C for 4 min and subsequently air-annealed at 450 and 500 °C for 1 h. The influence of annealing temperature on the structural, optical, electrical, and photo response properties of the films was investigated. XRD analysis confirmed the formation of predominantly single-phase monoclinic CuO, with improved crystallinity after annealing. The crystallite size increased from 5.22 nm for the as-deposited film to 8.13 nm for the C4-A500 film, while the crystallinity increased from 61.9% to 85.6%.
Zitieren
APA
S., M. R. (2026). Air Annealing Effects on Spray-Deposited CuO Thin Films and p-CuO/n-Si Heterojunction Photo Response. International Journal of Innovative Science and Research Technology, 982. https://doi.org/10.38124/ijisrt/26aug608
Vancouver
S. MR. Air Annealing Effects on Spray-Deposited CuO Thin Films and p-CuO/n-Si Heterojunction Photo Response. International Journal of Innovative Science and Research Technology. 2026:982. doi:10.38124/ijisrt/26aug608
BibTeX
@article{S2026,
author = {S., Madhukeswara R.},
title = {Air Annealing Effects on Spray-Deposited CuO Thin Films and p-CuO/n-Si Heterojunction Photo Response},
journal = {International Journal of Innovative Science and Research Technology},
year = {2026},
pages = {982},
doi = {10.38124/ijisrt/26aug608}
}
EUVIMED