EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

p-CuO/n-ZnO Heterojunction Pyro-Phototronic Photodetector Controlled by CuO Preparation Parameters

Zhen Zhang, Fangpei Li, Wenbo Peng iD, Quanzhe Zhu, Yongning He

Sensors · 22.12.2024 · 24 (24) · 8197

DOI: 10.3390/s24248197 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 22.12.2024. Verfasst von Zhen Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Microelectronics, Xi'an Jiaotong University, Xi'an 710049, China. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, China Postdoctoral Science Foundation, Postdoctoral Research Project of Shaanxi Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The combination of ZnO with narrow bandgap materials such as CuO is now a common method to synthesize high-performance optoelectronic devices. This study focuses on optimizing the performance of p-CuO/n-ZnO heterojunction pyroelectric photodetectors, fabricated through magnetron sputtering, by leveraging the pyro-phototronic effect. The devices’ photoresponse to UV (365 nm) and visible (405 nm) lasers is thoroughly examined. The results show that when the device performance is regulated by adjusting the three parameters—sputtering power, sputtering time, and sputtering oxygen–argon ratio—the optimal sputtering parameters should be as follows: sputtering power of 120 W, sputtering time of 15 min, and sputtering oxygen–argon ratio of 1:3. With the optimal sputtering parameters, the maximum responsivity of the pyroelectric effect and the traditional photovoltaic effect Rpyro+photo of the detector is 4.7 times that under the basic parameters, and the maximum responsivity of the traditional photovoltaic effect Rphoto is also 5.9 times that under the basic parameters. This study not only showcases the extensive potential of the pyro-phototronic effect in enhancing heterojunction photodetectors for high-performance photodetection but also provides some ideas for fabricating high-performance photodetectors.

Schlagwörter

Stichwörter der Autor:innen

CuO thin filmCuO/ZnO heterojunctionphotodetectorpyro-phototronic effect

Autor:innen und Institutionen

  • School of Microelectronics, Xi'an Jiaotong University, Xi'an 710049, China.
  • The Key Lab of Micro-Nano Electronics and System Integration of Xi'an City, Xi'an 710049, China.
  • Shaanxi Advanced Semiconductor Technology Center Co., Ltd., Xi'an 710077, China.

ORCID-Profile: Wenbo Peng

Förderung

  • National Natural Science Foundation of China
  • China Postdoctoral Science Foundation
  • Postdoctoral Research Project of Shaanxi Province

Zitieren

APA

Zhang, Z., Li, F., Peng, W., Zhu, Q., & He, Y. (2024). p-CuO/n-ZnO Heterojunction Pyro-Phototronic Photodetector Controlled by CuO Preparation Parameters. Sensors, 24(24), 8197. https://doi.org/10.3390/s24248197

Vancouver

Zhang Z, Li F, Peng W, Zhu Q, He Y. p-CuO/n-ZnO Heterojunction Pyro-Phototronic Photodetector Controlled by CuO Preparation Parameters. Sensors. 2024;24(24):8197. doi:10.3390/s24248197

BibTeX
@article{Zhang2024,
  author = {Zhang, Zhen and Li, Fangpei and Peng, Wenbo and Zhu, Quanzhe and He, Yongning},
  title = {p-CuO/n-ZnO Heterojunction Pyro-Phototronic Photodetector Controlled by CuO Preparation Parameters},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {24},
  pages = {8197},
  doi = {10.3390/s24248197}
}
Kostenlos starten →