EUVIMEDSkopri EUVIMED
Video/Audio

TD-DFT Guided Advanced E-Eye Sensing Technique for On-site Quantification of Fe, Cr, F, and As in the Environmental, Biological, and Food Samples

Shrikant Kashyap, Rajasekhar Ravula, Neha Majee, Tapas K Mandal

Journal of Visualized Experiments · 2025

DOI: 10.3791/68767 ↗

At a glance

Video/Audio in Journal of Visualized Experiments, 2025. Written by Shrikant Kashyap and 3 co-authors. Institution: Department of Chemical Engineering, and Center for Nanotechnology, Indian Institute of Technology Guwahati. Major MEDLINE topics: Iron, Food Analysis, Chromium. 45 references.

AstrattSubjectsDettalji biblijografiċiCiteRelated studies

Abstract (original language)

This paper demonstrates the step-by-step protocol of designing and developing an E-Eye-enabled multiplexed point-of-care testing (POCT) kit. We use time-dependent density function theory (TD-DFT) to explore the basic working principle of the sensors before going into the details of the device's hardware. The TD-DFT analysis gives the λmax of the targeted element, which helps find the most accurate route for detecting the pollutant in the analytes. The TD-DFT analysis is performed in Gaussian 09 and Gauss View 5.0 software. An optical sensor called the electronic eye (E-Eye) has been developed based on the λmax value and the Light Emitting Diode/Light Dependent Resistor (LED/LDR) principle. The E-Eye device has been fabricated with an LED, an LDR placed opposite each other, and other hardware, including a liquid crystal display (LCD) interfaced with a microprocessor across a voltage divider, acting as a central microprocessor. Initially, all the samples (environmental, biological, and food and beverages) were pre-processed to extract all the targeted elements in the aqueous phase. The specific (lock and key) reaction has been carried out in the specified reactor, and readings observed in the display unit have been recorded. An indigenously multiplexed device has also been fabricated to detect Fe, Cr, As, and F simultaneously. The efficacy of the sensors has been tested against more than 2000 samples and compared with the gold standard methods. A good precision has been confirmed with the accuracy of 95.3%, 94.7% and 95.4% with respect to the samples of environmental, biological, and food and beverages. It is important to note that the performance of the arsenic sensor has been compared with Atomic Absorption Spectrometry (AAS) results, and all other results, i.e., sensors for iron, chromium, and fluoride, have been compared with the results obtained from UV-Vis analysis.

Subjects

MeSH terms (MEDLINE)

IronFood AnalysisChromiumDensity Functional TheoryPoint-of-Care SystemsFood Contamination

Substances

IronChromium

Authors and institutions

  • Department of Chemical Engineering, and Center for Nanotechnology, Indian Institute of Technology Guwahati.
  • Department of Chemical Engineering, K.K. Wagh Institute of Engineering Education and Research.
  • Department of Chemical Engineering, and Center for Nanotechnology, Indian Institute of Technology Guwahati; tapasche@iitg.ac.in.

Cite

APA

Kashyap, S., Ravula, R., Majee, N., & Mandal, T. K. (2025). TD-DFT Guided Advanced E-Eye Sensing Technique for On-site Quantification of Fe, Cr, F, and As in the Environmental, Biological, and Food Samples. Journal of Visualized Experiments. https://doi.org/10.3791/68767

Vancouver

Kashyap S, Ravula R, Majee N, Mandal TK. TD-DFT Guided Advanced E-Eye Sensing Technique for On-site Quantification of Fe, Cr, F, and As in the Environmental, Biological, and Food Samples. Journal of Visualized Experiments. 2025. doi:10.3791/68767

BibTeX
@article{Kashyap2025,
  author = {Kashyap, Shrikant and Ravula, Rajasekhar and Majee, Neha and Mandal, Tapas K},
  title = {TD-DFT Guided Advanced E-Eye Sensing Technique for On-site Quantification of Fe, Cr, F, and As in the Environmental, Biological, and Food Samples},
  journal = {Journal of Visualized Experiments},
  year = {2025},
  doi = {10.3791/68767}
}
Start for free →