EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of a machining allowance model for rectangular pocket milling operations

Tung Tran Thanh, Nguyen Thi Anh, Nguyen Xuan Quynh, Tran Vu Minh

Revista de Ciencias Tecnológicas · 08.07.2026 · 9 (3) · 1-14

DOI: 10.37636/recit.v9n3e498 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Revista de Ciencias Tecnológicas, online erschienen am 08.07.2026. Verfasst von Tung Tran Thanh und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Machining allowance plays a critical role in determining productivity, energy consumption, cutting force, and dimensional accuracy in pocket milling operations, yet it is commonly selected empirically in industrial practice. This study proposes an analytical, optimization-based framework for determining an efficient machining allowance for rectangular pocket milling. Mathematical models are developed to quantify total energy consumption, machining time, and peripheral cutting force as functions of cutting parameters and allowance distribution between rough and finish milling stages. A multi-objective optimization problem is formulated and solved using the Non-dominated Sorting Genetic Algorithm II (NSGA-II) to simultaneously minimize energy consumption, machining time, and cutting force. Experimental validation is conducted on polymer workpieces and compared with CAM-recommended parameters. The results show that the balanced Pareto-optimal solution reduces machining time from 5 min 58.52 s to 2 min 26.47 s, corresponding to an approximate 59% reduction, and decreases the peripheral cutting force from 698.18 N to 382.73 N, corresponding to an approximate 45% reduction, while achieving the target pocket depth of approximately 22 mm and eliminating the ~2 mm over-machining observed under CAM-default settings. A minimum-energy solution further reduces energy consumption from 0.44 kWh to 0.267 kWh, but at the cost of a significantly increased cutting force (1203.45 N). These results indicate that treating machining allowance as an optimization variable enables systematic trade-offs among productivity, energy consumption, cutting force, and dimensional accuracy, offering a practical alternative to conventional CAM-based parameter selection.

Zitieren

APA

Thanh, T. T., Anh, N. T., Quynh, N. X., & Minh, T. V. (2026). Development of a machining allowance model for rectangular pocket milling operations. Revista de Ciencias Tecnológicas, 9(3), 1-14. https://doi.org/10.37636/recit.v9n3e498

Vancouver

Thanh TT, Anh NT, Quynh NX, Minh TV. Development of a machining allowance model for rectangular pocket milling operations. Revista de Ciencias Tecnológicas. 2026;9(3):1-14. doi:10.37636/recit.v9n3e498

BibTeX
@article{Thanh2026,
  author = {Thanh, Tung Tran and Anh, Nguyen Thi and Quynh, Nguyen Xuan and Minh, Tran Vu},
  title = {Development of a machining allowance model for rectangular pocket milling operations},
  journal = {Revista de Ciencias Tecnológicas},
  year = {2026},
  volume = {9},
  number = {3},
  pages = {1--14},
  doi = {10.37636/recit.v9n3e498}
}
Kostenlos starten →