EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Vibration-Based Characterization of Chatter Development in Milling Operations

Eduardo Rubio, Diego González-Quijano

Applied Mechanics · 15.11.2026 · 7 (4) · 97

DOI: 10.3390/applmech7040097 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Mechanics, online erschienen am 15.11.2026. Verfasst von Eduardo Rubio und 1 weiteren Autor:innen. Die Arbeit nennt 14 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Chatter is a source of instability in milling operations, affecting surface quality and machining performance. This study presents a multidomain approach for chatter analysis based on acceleration and displacement measurements. Milling experiments were conducted under chatter-free, slight chatter, and severe chatter conditions using an accelerometer to measure workpiece vibrations and an inductive sensor to measure tool displacement. The acquired signals were analyzed in the time and frequency domains using Fast Fourier Transform, while time–frequency characteristics were examined through Daubechies 4 wavelet decomposition. Root Mean Square (RMS) analysis was applied to the dominant wavelet subbands. For acceleration, chatter was associated with spectral components between 200 and 600 Hz, near the response frequencies identified by impact testing, and the RMS of the dominant subband (312–625 Hz) increased approximately 3.7 times relative to the beginning of the cut. For displacement, peak amplitudes increased from about ±60 μm to 370 μm, and the RMS of the dominant subband (39–78 Hz) increased approximately 6.6 times. Between slight and severe chatter, the displacement RMS tripled through a nearly step-like rise, whereas the acceleration RMS increased progressively by about 2.3 times. The non-synchronous energy ratio, computed identically for both sensors, rose from about 0.02 to 0.7 for displacement, whereas for acceleration it was already about 0.8 without chatter and reached 0.97. These results suggest that displacement measurements may provide greater sensitivity to the progression toward severe chatter under the evaluated conditions.

Zitieren

APA

Rubio, E., & González-Quijano, D. (2026). Vibration-Based Characterization of Chatter Development in Milling Operations. Applied Mechanics, 7(4), 97. https://doi.org/10.3390/applmech7040097

Vancouver

Rubio E, González-Quijano D. Vibration-Based Characterization of Chatter Development in Milling Operations. Applied Mechanics. 2026;7(4):97. doi:10.3390/applmech7040097

BibTeX
@article{Rubio2026,
  author = {Rubio, Eduardo and González-Quijano, Diego},
  title = {Vibration-Based Characterization of Chatter Development in Milling Operations},
  journal = {Applied Mechanics},
  year = {2026},
  volume = {7},
  number = {4},
  pages = {97},
  doi = {10.3390/applmech7040097}
}
Kostenlos starten →