Effect of Machining Parameters on Surface Roughness in Mild-Steel Turning and Computer-Vision-Based Tool Wear Prediction
Journal of Manufacturing Engineering · 01.06.2026 · 21 (2) · 058-063
DOI: 10.37255/jme.v21i2pp058-063 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Manufacturing Engineering, online erschienen am 01.06.2026. Verfasst von Ranjith D S und 1 weiteren Autor:innen.
Abstract (Originalsprache)
In this paper, we present a combined experimental and data-driven study of surface integrity and tool condition in mild-steel turning. Controlled experiments were conducted on a semi-automatic lathe to analyze the effects of spindle speed, feed rate, depth of cut, and coolant use on surface roughness (Ra), with surface finish measured using a Mitutoyo SJ-210 profilometer and high-resolution images of machined surfaces and cutting tools acquired with a Nikon D-3000 imaging setup. Experimental findings showed that coolant application reduced Ra by an average of 22.69%, with the improvement more pronounced at higher spindle speeds due to enhanced thermal control, lubrication, and chip evacuation. To complement these results, a computer vision–based framework was developed for tool health monitoring using semi-supervised anomaly detection, wherein a PaDiM-based model trained exclusively on healthy tool images successfully identified worn-tool states and Grad-CAM heatmaps localized wear regions on tool edges, thereby enhancing explainability. The trained model was further optimized with OpenVINO for edge deployment, enabling real-time inference on CPU-based industrial devices with minimal latency. The contributions of this work are threefold: (i) systematic analysis of machining parameters on surface roughness, (ii) development of a computer-vision–driven framework for tool wear classification and prediction under limited labeled data, and (iii) demonstration of edge-optimized deployment for real-time shop-floor feasibility. This integrated approach addresses critical gaps in machining research by jointly considering machining parameters, measured roughness, and visual tool/surface features, paving the way for intelligent, explainable, and deployable monitoring systems in smart manufacturing.
Zitieren
APA
S, R. D., & S, R. (2026). Effect of Machining Parameters on Surface Roughness in Mild-Steel Turning and Computer-Vision-Based Tool Wear Prediction. Journal of Manufacturing Engineering, 21(2), 058-063. https://doi.org/10.37255/jme.v21i2pp058-063
Vancouver
S RD, S R. Effect of Machining Parameters on Surface Roughness in Mild-Steel Turning and Computer-Vision-Based Tool Wear Prediction. Journal of Manufacturing Engineering. 2026;21(2):058-063. doi:10.37255/jme.v21i2pp058-063
BibTeX
@article{S2026,
author = {S, Ranjith D and S, Rohith},
title = {Effect of Machining Parameters on Surface Roughness in Mild-Steel Turning and Computer-Vision-Based Tool Wear Prediction},
journal = {Journal of Manufacturing Engineering},
year = {2026},
volume = {21},
number = {2},
pages = {058--063},
doi = {10.37255/jme.v21i2pp058-063}
}
EUVIMED