EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

An experimental process parameter study on the identification of defects in additively fabricated Al6061 with laser powder bed fusion

Faik Derya Ince, Sivaji Karna, Tianyu Zhang, Andrew J. Gross, Timothy Krentz, Dale Hitchcock, Lang Yuan, Tuğrul Özel

Materials Science in Additive Manufacturing · 30.08.2024 · 3 (3) · 3652

DOI: 10.36922/msam.3652 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science in Additive Manufacturing, online erschienen am 30.08.2024. Verfasst von Faik Derya Ince und 7 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additively fabricated metal parts using laser powder bed fusion (L-PBF) possess sophisticated morphology due to the recurrent use of laser-induced metal powder melting and solidification. The surface and 3D morphology of these parts often include defects in the form of protrusions, depressions, pores, voids, keyholes, or cracks that are known to be influenced by laser scanning paths and layer-to-layer processing. Such inconsistent part quality hampers the extensive adoption of L-PBF. Pores and cracks are detrimental to the fatigue life of the parts and components. Quantifying and controlling part defects and optimizing processing and scanning strategy parameters adaptively in real-time through in situ monitoring systems are highly desired. This study investigates the optimization of experimental process parameters (power, scan velocity, and hatch spacing) and their effects on the cracking and porosity of Al6061 alloy using machine learning techniques. Multi-objective optimization is formulated and conducted to determine the L-PBF parameters that minimize both porosity and crack densities.

Zitieren

APA

Ince, F. D., Karna, S., Zhang, T., Gross, A. J., Krentz, T., Hitchcock, D., Yuan, L., & Özel, T. (2024). An experimental process parameter study on the identification of defects in additively fabricated Al6061 with laser powder bed fusion. Materials Science in Additive Manufacturing, 3(3), 3652. https://doi.org/10.36922/msam.3652

Vancouver

Ince FD, Karna S, Zhang T, Gross AJ, Krentz T, Hitchcock D, et al. An experimental process parameter study on the identification of defects in additively fabricated Al6061 with laser powder bed fusion. Materials Science in Additive Manufacturing. 2024;3(3):3652. doi:10.36922/msam.3652

BibTeX
@article{Ince2024,
  author = {Ince, Faik Derya and Karna, Sivaji and Zhang, Tianyu and Gross, Andrew J. and Krentz, Timothy and Hitchcock, Dale and Yuan, Lang and Özel, Tuğrul},
  title = {An experimental process parameter study on the identification of defects in additively fabricated Al6061 with laser powder bed fusion},
  journal = {Materials Science in Additive Manufacturing},
  year = {2024},
  volume = {3},
  number = {3},
  pages = {3652},
  doi = {10.36922/msam.3652}
}
Kostenlos starten →