EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Process Parameters and Process Defects on the Flexural Fatigue Life of Ti-6Al-4V Fabricated by Laser Powder Bed Fusion

Brandon Ramirez, Cristian Banuelos iD, Alex De La Cruz, Shadman Tahsin Nabil iD, Edel Arrieta, Lawrence E Murr, Ryan B Wicker, Francisco Medina iD

Materials · 16.09.2024 · 17 (18) · 4548

DOI: 10.3390/ma17184548 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.09.2024. Verfasst von Brandon Ramirez und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Aerospace and Mechanical Engineering, University of Texas at El Paso, El Paso, TX 79968, USA. Die Arbeit wurde bisher 17-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: NASA, NASA ULI, discretionary UTEP Keck Center funds.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The fatigue performance of laser powder bed fusion-fabricated Ti-6Al-4V alloy was investigated using four-point bending testing. Specifically, the effects of keyhole and lack-of-fusion porosities along with various surface roughness parameters, were evaluated in the context of pore circularity and size using 2D optical metallography. Surface roughness of Sa = 15 to 7 microns was examined by SEM, and the corresponding fatigue performance was found to vary by 102 cycles to failure. The S–N curves for the various defects were also correlated with process window examination in laser beam power–velocity (P–V) space. Basquin’s stress-life relation was well fitted to the experimental S–N curves for various process parameters except keyhole porosity, indicating reduced importance for LPBF-fabricated Ti-6Al-4V alloy components.

Schlagwörter

Stichwörter der Autor:innen

Basquin’s law fittingTi-6Al-4V alloyadditive manufacturingfatigue performancelaser powder bed fusionporosity defectssurface roughness

Autor:innen und Institutionen

  • Department of Aerospace and Mechanical Engineering, University of Texas at El Paso, El Paso, TX 79968, USA.
  • W.M. Keck Center for 3D Innovation, University of Texas at El Paso, El Paso, TX 79968, USA.

ORCID-Profile: Cristian Banuelos, Shadman Tahsin Nabil, Francisco Medina

Förderung

  • NASA
  • NASA ULI
  • discretionary UTEP Keck Center funds
  • Mr. and Mrs. MacIntosh Murchinson Chair I in Engineering Endowment at UTEP

Zitieren

APA

Ramirez, B., Banuelos, C., De La Cruz, A., Nabil, S. T., Arrieta, E., Murr, L. E., Wicker, R. B., & Medina, F. (2024). Effects of Process Parameters and Process Defects on the Flexural Fatigue Life of Ti-6Al-4V Fabricated by Laser Powder Bed Fusion. Materials, 17(18), 4548. https://doi.org/10.3390/ma17184548

Vancouver

Ramirez B, Banuelos C, De La Cruz A, Nabil ST, Arrieta E, Murr LE, et al. Effects of Process Parameters and Process Defects on the Flexural Fatigue Life of Ti-6Al-4V Fabricated by Laser Powder Bed Fusion. Materials. 2024;17(18):4548. doi:10.3390/ma17184548

BibTeX
@article{Ramirez2024,
  author = {Ramirez, Brandon and Banuelos, Cristian and De La Cruz, Alex and Nabil, Shadman Tahsin and Arrieta, Edel and Murr, Lawrence E and Wicker, Ryan B and Medina, Francisco},
  title = {Effects of Process Parameters and Process Defects on the Flexural Fatigue Life of Ti-6Al-4V Fabricated by Laser Powder Bed Fusion},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {18},
  pages = {4548},
  doi = {10.3390/ma17184548}
}
Kostenlos starten →