EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

An experimental study on 3D-printed continuous fiber-reinforced composite auxetic structures

Peiqing Liu, Jikai Liu

Materials Science in Additive Manufacturing · 12.12.2023 · 2 (4) · 2159

DOI: 10.36922/msam.2159 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science in Additive Manufacturing, online erschienen am 12.12.2023. Verfasst von Peiqing Liu und 1 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref). Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Auxetic structures have negative Poisson’s ratios (NPR). Due to the unique deformation mechanism, auxetic structures possess extraordinary mechanical properties, such as indentation resistance, shear resistance, fracture toughness, and energy absorption capability. However, the stiffness and load-bearing capacity are the weak points for auxetic structures. 3D printing of continuous fiber-reinforced composite enables the fabrication of lightweight and highly stiff complex structures, providing a perfect manufacturing method to remedy the shortcomings of auxetic structures. This work investigated the mechanical properties of 3D-printed continuous fiber-reinforced composite auxetic structures. In this study, we utilized continuous fiber-reinforced composite 3D printing to fabricate two types of auxetic structures. The fiber path configurations were varied among the test specimens to explore the effect of fiber distribution on mechanical properties. A uniaxial tensile test was performed to evaluate the tensile properties and Poisson’s ratio of continuous fiber-reinforced composite auxetic structures. Results showed that the tensile modulus and strength have been dramatically improved with a minor mass increase. The auxetic behavior can be strengthened by properly allocating the reinforcing fibers. However, the addition of continuous fiber led to different performances on the selected auxetic structures. In summary, two out of the five specimens demonstrated simultaneous improvements in stiffness, strength, and auxeticity across the conducted tests.

Zitieren

APA

Liu, P., & Liu, J. (2023). An experimental study on 3D-printed continuous fiber-reinforced composite auxetic structures. Materials Science in Additive Manufacturing, 2(4), 2159. https://doi.org/10.36922/msam.2159

Vancouver

Liu P, Liu J. An experimental study on 3D-printed continuous fiber-reinforced composite auxetic structures. Materials Science in Additive Manufacturing. 2023;2(4):2159. doi:10.36922/msam.2159

BibTeX
@article{Liu2023,
  author = {Liu, Peiqing and Liu, Jikai},
  title = {An experimental study on 3D-printed continuous fiber-reinforced composite auxetic structures},
  journal = {Materials Science in Additive Manufacturing},
  year = {2023},
  volume = {2},
  number = {4},
  pages = {2159},
  doi = {10.36922/msam.2159}
}
Kostenlos starten →