Mechanical properties and damage failure of 3D ‐printed continuous carbon fiber‐reinforced composite honeycomb sandwich structures with fiber‐interleaved core
Polymer Composites · 2023-03 · 44 (3) · 1980-1992
DOI: 10.1002/pc.27221 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymer Composites, online erschienen am 30.12.2022. Verfasst von Jiafan Feng und 5 weiteren Autor:innen. Die Arbeit wurde bisher 40-mal zitiert (Crossref) und nennt 40 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Heilongjiang Province.
Abstract (Originalsprache)
Sandwich structures with good mechanical performance can be manufactured by continuous carbon‐fiber‐reinforced composites (CCFRC) via the fused filament fabrication (FFF) technology. Poor inter‐thread bonding is a major reason for the failure of these sandwich structures. In the present study, a novel fiber‐interleaved printing pattern has been proposed to improve the bonding property between printing threads. And panel/core integrated sandwich structures were fabricated via the FFF technology. The manufacturing quality was examined by microscopic examination and non‐destructive computed tomography (CT) scanning. The results indicated that manufacturing voids are mainly concentrated in the printed carbon fiber bundles, resulting from inadequate infiltration between the reinforcement and the matrix. Flatwise compression tests were conducted to compare the mechanical performance of sandwich structures with the fiber‐adjacent and fiber‐interleaved core. The results clearly demonstrated that the fiber‐interleaved design can significantly improve the mechanical performance of the sandwich structures (i.e., 44% higher in elastic modulus and 119% higher in strength). Furthermore, three‐point bending tests were conducted to investigate the flexural behavior. Fractographic analysis demonstrated that the main failure modes under these loading conditions include fiber pull‐out and breakage, delamination, local core crushing, fiber/matrix and panel/core debonding.
Förderung
- National Natural Science Foundation of China
- Natural Science Foundation of Heilongjiang Province
Zitieren
APA
Feng, J., Yao, L., Lyu, Z., Wu, Z., Zhang, G., & Zhao, H. (2023). Mechanical properties and damage failure of 3D ‐printed continuous carbon fiber‐reinforced composite honeycomb sandwich structures with fiber‐interleaved core. Polymer Composites, 44(3), 1980-1992. https://doi.org/10.1002/pc.27221
Vancouver
Feng J, Yao L, Lyu Z, Wu Z, Zhang G, Zhao H. Mechanical properties and damage failure of 3D ‐printed continuous carbon fiber‐reinforced composite honeycomb sandwich structures with fiber‐interleaved core. Polymer Composites. 2023;44(3):1980-1992. doi:10.1002/pc.27221
BibTeX
@article{Feng2023,
author = {Feng, Jiafan and Yao, Liaojun and Lyu, Zhangming and Wu, Zihao and Zhang, Guobin and Zhao, Hefei},
title = {Mechanical properties and damage failure of 3D ‐printed continuous carbon fiber‐reinforced composite honeycomb sandwich structures with fiber‐interleaved core},
journal = {Polymer Composites},
year = {2023},
volume = {44},
number = {3},
pages = {1980--1992},
doi = {10.1002/pc.27221}
}
EUVIMED