EUVIMEDEUVIMED entdecken
Crossref

Qualification of an Additive-Subtractive Process for Medical Implants Via Powder Bed Fusion of Commercially Pure Titanium Using a Laser Beam

Malek Abu-Gharbieh, Eckart Uhlmann, Andreas Schwitalla, Rafik Akhmad

Journal of Machine Engineering · 22.06.2026 · 26 (2) · 5-17

DOI: 10.36897/jme/221789 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Machine Engineering, online erschienen am 02.06.2026. Verfasst von Malek Abu-Gharbieh und 3 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing with powder bed fusion of metals using a laser beam (PBF-LB/M) enables the manufacturing of complex medical implant geometries, such as patient-specific dental implants that replicate the shape of natural tooth roots. Such geometries may support improved osseointegration in the jawbone. This study investigates commercially pure titanium grade 2 (TiGd2) produced by PBF-LB/M as the basis of an additive-subtractive process for medical implants. Specimens were manufactured in different build orientations (BO) to assess material and surface properties. Micro computed tomography indicated a low internal defect density. Tensile testing showed BO dependent anisotropy, whereas compression testing showed no pronounced anisotropy. Across all BO, mean values were ultimate tensile strength RM = 772 MPa, elongation at break A = 24.4 %, and compressive yield strength R_dp = 746 MPa. Surface post processing enabled adjustment of roughness, with Ra decreasing from Ra_as = 6.3 µm in the as built state to Ra_pb = 5.1 µm after particle blasting, Ra_et = 3.6 µm after acid etching, and Ra_df = 0.36 µm after disc finishing. Overall, the results confirm the potential of PBF-LB/M processed TiGd2 for additive subtractive manufacturing of medical implants.

Zitieren

APA

Abu-Gharbieh, M., Uhlmann, E., Schwitalla, A., & Akhmad, R. (2026). Qualification of an Additive-Subtractive Process for Medical Implants Via Powder Bed Fusion of Commercially Pure Titanium Using a Laser Beam. Journal of Machine Engineering, 26(2), 5-17. https://doi.org/10.36897/jme/221789

Vancouver

Abu-Gharbieh M, Uhlmann E, Schwitalla A, Akhmad R. Qualification of an Additive-Subtractive Process for Medical Implants Via Powder Bed Fusion of Commercially Pure Titanium Using a Laser Beam. Journal of Machine Engineering. 2026;26(2):5-17. doi:10.36897/jme/221789

BibTeX
@article{AbuGharbieh2026,
  author = {Abu-Gharbieh, Malek and Uhlmann, Eckart and Schwitalla, Andreas and Akhmad, Rafik},
  title = {Qualification of an Additive-Subtractive Process for Medical Implants Via Powder Bed Fusion of Commercially Pure Titanium Using a Laser Beam},
  journal = {Journal of Machine Engineering},
  year = {2026},
  volume = {26},
  number = {2},
  pages = {5--17},
  doi = {10.36897/jme/221789}
}
Kostenlos starten →