EUVIMEDEUVIMED entdecken
Crossref

Comparative CFD Analysis of Air–Fuel Ratio Effects on the Performance of a Non-Premixed Combustion Burner

Taufik Kurniawan, Muhammad Ikhlas, Mohammad Zaini Ma'ruf

The Journal of Ocean, Mechanical and Aerospace -science and engineering- (JOMAse) · 30.07.2026 · 70 (2) · 118-126

DOI: 10.36842/jomase.v70i2.616 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of Ocean, Mechanical and Aerospace -science and engineering- (JOMAse), online erschienen am 30.07.2026. Verfasst von Taufik Kurniawan und 2 weiteren Autor:innen.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Checker bricks in regenerative furnaces gradually accumulate deposits from glass raw materials during long-term operation, reducing heat transfer efficiency and obstructing combustion air and exhaust gas flow. These deposits increase furnace pressure, accelerate checker brick degradation, and shorten furnace service life. This study evaluates the performance of a non-premixed combustion burner for checker brick maintenance. Computational Fluid Dynamics (CFD) simulations were conducted using the non-premixed combustion model in ANSYS Fluent with different air-to-fuel ratios (AFR) and validated experimentally. The optimum performance was achieved at an AFR of 10.6:1, producing a maximum flame temperature of 944°C and a flame length of 1,683 mm, satisfying the required heating temperature and flame penetration for effective deposit removal. Experimental validation showed stable burner operation at air damper openings between 55% and 60%, successfully melting deposits on the checker brick surface. The proposed burner is suitable for regenerative furnace maintenance, while the validated CFD model provides a reliable approach for future burner optimization and heating coverage analysis of checker brick treatment.

Zitieren

APA

Kurniawan, T., Ikhlas, M., & Ma'ruf, M. Z. (2026). Comparative CFD Analysis of Air–Fuel Ratio Effects on the Performance of a Non-Premixed Combustion Burner. The Journal of Ocean, Mechanical and Aerospace -science and engineering- (JOMAse), 70(2), 118-126. https://doi.org/10.36842/jomase.v70i2.616

Vancouver

Kurniawan T, Ikhlas M, Ma'ruf MZ. Comparative CFD Analysis of Air–Fuel Ratio Effects on the Performance of a Non-Premixed Combustion Burner. The Journal of Ocean, Mechanical and Aerospace -science and engineering- (JOMAse). 2026;70(2):118-126. doi:10.36842/jomase.v70i2.616

BibTeX
@article{Kurniawan2026,
  author = {Kurniawan, Taufik and Ikhlas, Muhammad and Ma'ruf, Mohammad Zaini},
  title = {Comparative CFD Analysis of Air–Fuel Ratio Effects on the Performance of a Non-Premixed Combustion Burner},
  journal = {The Journal of Ocean, Mechanical and Aerospace -science and engineering- (JOMAse)},
  year = {2026},
  volume = {70},
  number = {2},
  pages = {118--126},
  doi = {10.36842/jomase.v70i2.616}
}
Kostenlos starten →