Design of a Sintering Machine for 316L Material Products from 3D Printing for Product Design Engineering Laboratory
Jurnal Teknik Mesin Mechanical Xplore · 28.02.2026 · 6 (2) · 126-138
DOI: 10.36805/cy835n03 ↗Kurz gefasst
Fachartikel in der Zeitschrift Jurnal Teknik Mesin Mechanical Xplore, online erschienen am 28.02.2026. Verfasst von Dinny Indrian und 1 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The increasing demand for high-performance metal components in additive manufacturing necessitates effective post-processing methods to enhance material density and mechanical properties. This study presents the design of a compact laboratory-scale sintering machine for 316 L stainless steel components fabricated using fused-filament fabrication (FFF). The design process adopted a simplified VDI 2222 methodology encompassing planning, conceptual design, and detailed design stages. Functional decomposition and systematic evaluation of the alternative design concepts were conducted using the VDI 2225-based assessment method, leading to the selection of the optimal configuration. Thermal analysis and radiation-based simulations demonstrated that the proposed system is capable of achieving the required sintering temperature range for 316 L stainless steel (approximately 1100–1300 °C) with a stable heat distribution. Structural analysis further confirmed that all critical components operated within acceptable safety limits, with safety factors exceeding the standard design criteria. Overall, the proposed design provides a technically feasible and safe solution for laboratory-scale sintering, supporting research and prototyping in metal additive manufacturing.
Zitieren
APA
Indrian, D., & Pradipta, A. S. (2026). Design of a Sintering Machine for 316L Material Products from 3D Printing for Product Design Engineering Laboratory. Jurnal Teknik Mesin Mechanical Xplore, 6(2), 126-138. https://doi.org/10.36805/cy835n03
Vancouver
Indrian D, Pradipta AS. Design of a Sintering Machine for 316L Material Products from 3D Printing for Product Design Engineering Laboratory. Jurnal Teknik Mesin Mechanical Xplore. 2026;6(2):126-138. doi:10.36805/cy835n03
BibTeX
@article{Indrian2026,
author = {Indrian, Dinny and Pradipta, Adi S},
title = {Design of a Sintering Machine for 316L Material Products from 3D Printing for Product Design Engineering Laboratory},
journal = {Jurnal Teknik Mesin Mechanical Xplore},
year = {2026},
volume = {6},
number = {2},
pages = {126--138},
doi = {10.36805/cy835n03}
}
EUVIMED