CORROSION EVALUATION OF LPBF-MANUFACTURED DUPLEX STAINLESS STEEL
Acta Metallurgica Slovaca · 25.03.2024 · 30 (1) · 34-40
DOI: 10.36547/ams.30.1.1999 ↗Kurz gefasst
Fachartikel in der Zeitschrift Acta Metallurgica Slovaca, online erschienen am 25.03.2024. Verfasst von Zbigniew Brytan und 3 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref).
Abstract (Originalsprache)
In this study, the effect of as built and heat-treated additively manufactured 2507 super duplex stainless steel (SDSS) on electrochemical corrosion performance was examined. The corrosion was studied by Tafel polarization and electrochemical impedance spectroscopy (EIS) methods in a 3.5% NaCl solution. For this purpose, the as-built and heat-treated printed samples (solution annealed and stress-relieved) were examined by LOM/SEM and X-ray diffraction to evaluate the phase changes of steel at different processing stages. The correlation between corrosion resistance, structure, and heat treatment was assessed. As a result of the very fast cooling rate of the LPBF process, SDSS reveals ferrite as the major phase in the printed samples. To enhance the corrosion resistance of LPBF-produced duplex stainless steel, it's crucial to balance its two-phase structure and minimize residual stresses. The ferrite grains are elongated in the build direction, with some austenite precipitation along the grain boundaries or as Widmanstatten laths. The stress-relieved and as-printed SDSS exhibits reduced corrosion characteristics by around 20% compared to the solution-annealed SDSS, according to anodic polarization curves. Based on EIS results, the solution-annealed SDSS revealed an almost double increase in corrosion resistance (based on charge transfer resistance values) compared to the as-printed and stress-relieved conditions.
Zitieren
APA
Brytan, Z., Dagnaw, M., Bidulska, J., & Bidulsky, R. (2024). CORROSION EVALUATION OF LPBF-MANUFACTURED DUPLEX STAINLESS STEEL. Acta Metallurgica Slovaca, 30(1), 34-40. https://doi.org/10.36547/ams.30.1.1999
Vancouver
Brytan Z, Dagnaw M, Bidulska J, Bidulsky R. CORROSION EVALUATION OF LPBF-MANUFACTURED DUPLEX STAINLESS STEEL. Acta Metallurgica Slovaca. 2024;30(1):34-40. doi:10.36547/ams.30.1.1999
BibTeX
@article{Brytan2024,
author = {Brytan, Zbigniew and Dagnaw, Mengistu and Bidulska, Jana and Bidulsky, Robert},
title = {CORROSION EVALUATION OF LPBF-MANUFACTURED DUPLEX STAINLESS STEEL},
journal = {Acta Metallurgica Slovaca},
year = {2024},
volume = {30},
number = {1},
pages = {34--40},
doi = {10.36547/ams.30.1.1999}
}
EUVIMED